ISO 8124-1 ASTM F963 EN 71-1 Toy Safety Sharp Edge Tester AT25
Toy Safety Sharp Edge Tester is used to evaluate whether accessible edges on toys or other products are likely to cause injury.
+8615280858852
AT06 Brake Performance Testing Ramp is used to test the stability and braking performance of the stroller, and to simulate the possibility of overturning and the stability of the brake during daily use.
model :
AT06Brand:
AVENOorigin:
ChinaLead Time:
10-20daysport:
Xiamen portPayment:
T/T, L/Ccertificate:
CE ISO9001 ISO17025standard:
EN-71-1 section 8.18.3, 8.23, 8.26.1.1, 8.26.2, 8.26.3 ASTM F963 section 4.15, 8.15.1 ISO 8124-1 section 5.12, 5.16.2, 5.16.3, 5.22.3 GB 6675-2 section 5.12, 5.16.2, 5.16.3, 5.22.3AT06-Brake Performance Testing Ramp
Application Of Brake Performance Testing Ramp
AT06 Brake Performance Testing Ramp is used to test the stability and braking performance of the stroller, and to simulate the possibility of overturning and the stability of the brake during daily use.
Test Principle Of Brake Performance Testing Ramp
Place the stroller in the desired position on a certain angle on the slope for a specified period of time, to see if it is tipping or sliding when using the brakes.
Standards Of Brake Performance Testing Ramp
EN-71-1 section 8.18.3, 8.23, 8.26.1.1, 8.26.2, 8.26.3
ASTM F963 section 4.15, 8.15.1
ISO 8124-1 section 5.12, 5.16.2, 5.16.3, 5.22.3
GB 6675-2 section 5.12, 5.16.2, 5.16.3, 5.22.3
Key Specification Of Brake Performance Testing Ramp
Model |
AT06-1 |
AT06-2 |
Angle adjust method |
Manual adjust |
Electronic adjust |
Test angle |
0-45 degrees (adjustable) |
|
Ramp test surface |
Aluminum oxide P60 sandpaper |
|
Power supply |
- |
AC220V, 50/60HZ |
Dimension |
172*120*51cm |
|
Weight |
110kg |
Pneumatic Bursting Strength Tester is used to determine the expansion force and divergence rate of fabric, woven, knitted fabrics, non-woven, paper and board.
read moreElectronic Laboratory Padder made of stainless steel, easy to move, especially suitable for small laboratory tests. It is mainly used for the liquid content test of small cloth samples in the process of textile printing and dyeing and after finishing, and maintain a certain uniform rolling residual rate, so that the water content is stable, and all kinds of textiles can also be soaked in water and put on the instrument to squeeze water to cooperate with the test. It is a very convenient, simple and effective test tool for the laboratory.
read moreLiquid Leak Test Needle is used to test leakage of liquid stuffed toys.
read moreThe yarn hairiness tester is used to measure and analyze the hairiness index of yarn, and automatically test and statistically analyze the length, quantity, and distribution of hairiness. Can test different kinds of yarn including short fiber yarns made from cotton, wool, linen, silk, synthetic fibers, and their blends.
read moreASTM D3985 Oxygen Gas Transmission Rate Tester suitable for measuring the oxygen permeability performance of high barrier materials such as plastic film, aluminum foil plastic film, waterproof material, metal foil, etc.
read more