+8615280858852
If the testing salt liquid is not used more than one week, please do not use, so as not to affect the quality of the test. If time interval is long away from the next test, clean laboratory interior after the test, and water emission inside the heating pentrough. Water emission of heating tank --------------- open drain valve. Water emission of isolated sink --------------- Intermedi...
ICI Pilling and Snagging Tester is used to determine the surface fuzzes and pilling properties of both woven and knitted materials. It complies in full with the requirements of EN ISO 12945-1 and BS 5811, etc.. Product details AVENO Machine Recommend: AG05 ICI Pilling and Snagging Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenot...
Universal Tensile Strength Tester is widely used in various types of fabric, clothing, textile, composite material, non woven fabric, geotextile, and other types of materials, Widely used in test tensile, tearing, jacking, peeling, constant elongation, constant load, elasticity, seam slip, modulus and other mechanical properties. Feature of Universal Tensile Strength Tester (Single Column) The ins...
UV Accelerated Weathering Tester can simulate the damage caused by ultraviolet light, Rain Water and dew, test sample through exposing the sample to the alternating cycle of light and water under controlled high temperature. It uses ultraviolet light tubes to simulate the radiation of sunlight, use condense water and water spray to simulated dew and Rain Water. Widely used to selection of new mate...
ELectronic Thickness Tester used to measure the thickness of all kinds of textiles, textile products, non-woven fabrics and other materials under different pressure, and can also be used to determine the thickness of other uniform thin material. Standards Of ELectronic Thickness Tester ISO 5084, ISO 9073, ISO 9863, FZ/T 01003 ASTM D1777, GB/T 3820, GB/T 24218.2 AVENO Machine Recom...
1 The degree of expansion remains unchanged during the test: ▲Restart the instrument. ▲Check whether the test parameters are set correctly. 2 The experimental data results vary greatly. ▲Check the state of the instrument. The elastic diaphragm must be replaced when it is obviously deformed. AVENO Machine Recommend: AG10 Bursting Strength Tester Contact Us Now! Sales Dept Tel: +86 15280...