+8615280858852
Light Fastness Tester (air-cool), is used for testing experiments on simulated Light Color fastness, Photo-sweat Composite Colour fastness and Light Aging by Solar radiation of rubber, plastics, paints, paints, petrochemical, automotive, textile and other industries. By simulating the climatic conditions such as light, rain, spray, alternating light and dark, temperature and humidity, etc., to det...
It is strictly forbidden to put debris in the color light box to avoid damage to the neutral gray of the inner wall, which will cause errors in color matching. Do not start the lamp too frequently, otherwise it will affect the life of the lamp. The distribution of various light sources in the machine must be installed according to the "lamp distribution map" to obtain a uniform and sufficient ligh...
Color Matching Cabinets is used to proof the color deviation of the goods. Widely used in textiles, clothing, printing, dyeing, plastic, leather, electronic products industry. 1) Provide several light sources, i.e. D65, TL84, CWF, UV, F/A, U30 2) Apply microcomputer to switch between the light sources quickly. 3) Super timing function to record use time of each light source separately. 4) All fitt...
Application Snagging Assessment Box is suitable for all scoring test rating standards. The sample and standard sample are illuminated under the designated light source to compare the rating results. Feature 1. The 12V 55W quartz halogen lamp tube is used as the standard light source, and the lamp housing adopts a finier lens to make the light parallel, so that the illuminance is stable and accurat...
Mask Filter Material Performance Tester (PFE Particulate Filtration Efficiency Tester) is used to quickly and accurately detect the flow and other performance indicators of various planar materials, such as glass fiber, PTFE, PET and PP with efficiency, resistance and filtration speed features. Model: AM06 Mask Filter Material Performance Tester (PFE Particulate Filtration Efficiency Tester) Contr...
Testing method Take out the square on the left side of Lab Pilling Assessment Box, place the sample flat in the recess, and place a chart on the right side of the recess for comparison. Observe the sample and the chart with a line of sight perpendicular to the surface of the sample to judge the level of the condition of the sample surface. Steps 1. Put ICI Assessment Box on a flat table. 2. Turn o...