+8615280858852
1. Wash fastness tester instrument leaking ▲Check if the drain connector or drain valve is secure ▲Whether it is the connection of the heating pipe joint, the water level gauge, the rotating shaft, it is tightened or the gasket needs to be replaced. ▲Excessive water levels can also cause water leaks. 2.After installation, power on the work interface and click “Rotate”. The mot...
Leather Lastometer Ball Burst Tester is used to test crack resistance Index of all kinds of vamp, shoe upper material and other leather surfaces. Leather Lastometer Ball Burst Tester’ test principle: fixed specimen circumference then the steel ball as a speed of 12mm/min rises upward from the inner side of the leather, when a crack occurs on the sample surface, record the height of the rise and th...
Water Colour Fastness Tester is used to determine color fastness to washing or dry cleaning of fabrics consisting of cotton, wool, silk, ramie, chemical fiber, etc. Do you want to know more about the Water Colour Fastness Tester? Included Standard Accessories Stainless steel ball(φ6mm) Rubber gloves Steel bead spoon Test cup rubber sealing ring Counting cup (100ml) More about Water Colour Fastness...
1. Water Colour Fastness Tester Structure 1) Display and operation screen 2) Control box 3) Air switch 4) Automatic water inlet 5) Drain valve 6) Water tank 7) Water tank cover&...
Install of Fryma Fabric Extensiometer 1. Place the Frymer extension meter on a platform at least 1.5m above the ground. 2. One end of the pulley should be placed on the edge of the platform to facilitate the hanging of weights. Operation steps of Frymer Extension and Recovery Meter 1. Install the processed sample on the sample holder. The sample should be as flat as possible to avoid wri...
Install of Fryma Fabric Extensiometer 1. Place the Frymer extension meter on a platform at least 1.5m above the ground. 2. One end of the pulley should be placed on the edge of the platform to facilitate the hanging of weights. Operation steps of Frymer Extension and Recovery Meter 1. Install the processed sample on the sample holder. The sample should be as flat as possible to avoid wrinkles. 2. ...