1. The power supply should use a separate socket, the grounding line in the socket must be reliably grounding.

2. Rotary Tumble Dryer can not be installed in the open air and too wet environment, otherwise the electrical parts affected by humidity will easily cause fire damage or other failures. If the Fabric Tumble Tester is accidentally drenched with water or leaked into the water, it must be ventilated and dried.

3. Do not touch and use this dryer when there is water on bare feet or feet.

4. Before test, the fabric must be dried and dehydrated, and it is confirmed that the fabric can be loaded into the dryer without dripping, so as to prevent the dripping of water on the electric device from damaging the dryer and causing danger.

5. Please open the door only at the end of the drying process, remember not to force the door before, so as not to overheat the dryer scalding human skin.

6. At the end of each test, the filter frame should be removed in time and the thread chips should be cleaned with a dry wet cloth. Then wipe the observation window and filter with wet cloth, and often clean the air filter behind the dryer. Make sure the air inlet is ventilated and smooth, and the dust can be filtered.

7. If the Textile Drying Tester is not used for a long time, should unplug the power supply, close the door. When a fault or abnormal phenomenon occurs during use, a professional must be asked to check the repair, and the power should be pulled down before the repair.

More about Rotary Tumble Dryer please click:

https://www.avenotester.com/rotary-tumble-dryer-ac18_p174.html

Contact Us Now!

Sales Dept Tel: +86 15280858852

Email: sales@avenotester.com

Skype: sales@avenotester.com

Web: www.avenotester.com