ISO 8124-1 ASTM F963 EN 71-1 Toy Safety Sharp Edge Tester AT25
Toy Safety Sharp Edge Tester is used to evaluate whether accessible edges on toys or other products are likely to cause injury.
+8615280858852
Accessibility Probe is an imitation of a child's finger for assessing whether touching the surface or accessories of the toy (points and faces of the toy) may pose a danger.
model :
ATB03Brand:
AVENOorigin:
ChinaLead Time:
3days, in stockport:
Xiamen portPayment:
T/T, L/Ccertificate:
CE ISO9001 ISO17025standard:
EN-71-1, ASTM F963, 16CFR 1500, ISO 8124-1, GB6675-2ATB03-Accessibility Probe
Application Of Accessibility Probe
Accessibility Probe is an imitation of a child's finger for assessing whether touching the surface or accessories of the toy (points and faces of the toy) may pose a danger. There're 2 sizes of probe: probe A is used to imitate the finger of children under 3 years old and probe B is used to imitate the finger of children over 3 years old.
Feature Of Accessibility Probe
Standards
EN-71-1 section 8.10
ASTM F963 section 3.1.2
16CFR 1500section 48, 49
ISO 8124-1 section 5.7
GB6675-2 section 5.7
Key Specification Of Accessibility Probe
Model |
ATB03-Probe A |
ATB03-Probe B |
Applicable age |
under 36 months of age (including 36 months) |
over 36 months |
Material |
stainless |
|
Dimension |
25.6×25.6×145 mm |
38.4×38.4×160 mm |
Weight |
200 g |
335 g |
Liquid Leak Test Needle is used to test leakage of liquid stuffed toys.
read moreThe yarn hairiness tester is used to measure and analyze the hairiness index of yarn, and automatically test and statistically analyze the length, quantity, and distribution of hairiness. Can test different kinds of yarn including short fiber yarns made from cotton, wool, linen, silk, synthetic fibers, and their blends.
read moreASTM D3985 Oxygen Gas Transmission Rate Tester suitable for measuring the oxygen permeability performance of high barrier materials such as plastic film, aluminum foil plastic film, waterproof material, metal foil, etc.
read moreUV Integrator used to measure the UV energy of an exposure device. The main sensor of the measuring instrument is located on the back of the measuring instrument, with a measurement range of 250-410 nanometers. When measuring, it can be directly displayed on the display screen on the front of the UV energy meter and read out (in millijoules per square centimeter).
read moreAF46B Taber Abrasion Tester is used for abrasion resistance test of cloth, paper, paint, plywood, leather, natural rubber, etc.
read more