+8615280858852
+8615280858852
1. Equipment (1) TTF Tensile Tester (2) 200LBS or above pull-pound (3) Stopwatch (4) Steel ruler or caliper (5) Temperature/Hygrometer 2 Internal calibration and maintenance of equipment: All equipment is inspected and maintained every three months, and the inspection and maintenance results are recorded in the "Instrument Maintenance Record". 3 Test Conditions (1) Room temperature: 23±2℃, humidit...
Martindale Abrasion Tester is suitable for abrasion resistance test and apparent pilling performance test of woven fabrics, knitted fabrics, non-woven fabrics, decorative materials and coated fabrics. Martindale Abrasion Tester Test Principle: The fabric to be tested is installed in the upper sample holder and rubbed against the abrasive installed on the grinding table, and the friction trajectory...
The Martindale Abrasion and Pilling Tester is used to determine the pilling of fabrics under slight pressure: 1. Under the specified load, the circular sample is rubbed with the abrasive (that is, the standard fabric) with the plane motion of the trajectory forming the Lissajous figure. 2. The specimen holder containing the specimen or abrasive is free to rotate about the axis of the Martindale Ab...
The design of an instrument not only needs the accuracy of the test results, but also needs to pay attention to the operator's convenience of operation and the result review. Aveno combined the above points to design a Martindale Abrasion Tester that is easy to operate and review the results, and he uses precision components to precisely control the abrasion and pilling movement. The design princi...
Bursting Strength Tester is designed by absorbing the advantages of similar instruments at home and abroad. It adopts touch screen display, pneumatic clamping, external plexiglass protective cover, AC servo drive system, high-speed AD and processor, so that the instrument has the advantages of simple operation, high test accuracy, stable operation, low noise and convenient maintenance. How to main...
Fix the sole test piece in the test piece seat of DIN abrasion resistance testing machine, apply certain pressure to the test sole through the test piece seat, and carry out friction forward movement on the rotating drum of DIN abrasion resistance testing machine covered with sandpaper. After a certain distance, measure the weight wear of the sole test piece before and after friction, and calculat...
online service
+8615280858852
sales@avenotester.com
+8615280858852
