+8615280858852
+8615280858852
1. Before using Low Temperature ROSS Flexing Tester, first check if there is a reliable grounding device.
2. The laboratory voltage must be stable, it is best to install a voltage regulator in the laboratory, when the voltage is unstable, do not use the test equipment, so as to avoid the phenomenon of short circuit burning circuit board due to voltage instability.
3. When replacing the test piece, pay attention to the power supply should be turned off to avoid accidentally touching the start button and it is dangerous.
4. After the test is completed, wipe off the residual material after testing on the machine with a clean cotton cloth to keep the cleanliness of ROSS Flexing Tester at any time.
5. It is recommended to calibrate the Low Temperature ROSS Tester for Rubber at least once a year.
AVENO Machine Recommend:
AF23B-Low Temperature ROSS Flexing Tester
Contact Us Now!
Sales Dept Tel: +86 15280858852
Email: sales@avenotester.com
Skype: sales@avenotester.com
Web: www.avenotester.com
online service
+8615280858852
sales@avenotester.com
sales@avenotester.com
+8615280858852
