+8615280858852
Please add the lube to the belt pulley axletree and rotating member to make it working well. Please clean the Fabric Pilling Tester face everyday after your test, and you should spray the rust preventing oil regularly. Please check the tightness of the Random Pilling Tester’s belt regularly, and adjust or change the new belt of same standard depending on the circumstance. AVENO Machine R...
Make sure that the safety catch is locked. Loosen the blade retaining screws to allow the blade retaining plates to be removed, then either turn or replace the blades. Replace the blade retaining plates and tighten the screws. Repeat this procedure for each blade. Note that blades may be rotated until all cutting corners have been used. AVENO Machine Recommend AG26 100CM2 Sample Cutter Contact Us ...
Place the sample on the cutting board making sure that it is flat and smooth, do not stretch it. Place the cutter on the sample and release the safety catch, this is done by withdrawing the head of the catch, turning it through 90 degrees and locating the pin in the two recesses, this allows the blades to become operational. Whilst holding the cutter with one hand, apply pressure to the handle and...
1. Lay out the composite specimen smooth in a flat bottomed dish and cover with the solution. Thoroughly wet one composite specimen in the alkaline solution at a liquor ratio of 50:1 and allow it to remain in the solution for 30 minutes. Press and move it from time to time to ensure good and uniform penetration of the liquor. 2. After this time interval pour off the solutions and wipe the excess l...
1. Always keep the Taber Abrasion Tester clean and tidy by wiping the Taber Abrasion Resistance Tester with cotton cloth. 2. The metallic surface shall be applied with anti-rust oil. 3. Fill lubricating oil for the moving parts at regular intervals. AVENO Machine Recommend: AF46 Taber Abrasion Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skyp...
1. The shell of the Drying Oven shall be well grounded to guarantee the safe use. 2. The Drying Oven shall be placed inside one well-ventilated room, surrounding which no inflammable and explosive articles are available. 3. The Drying Oven has no explosion-proof device, so never place inflammable and explosive articles inside for drying. 4. The articles in the cabinet shall not be too crowded. Cer...