+8615280858852
1) ICI Pilling and Snagging Tester is packed in a whole box. The wooden box is not allowed to lie on its side during transportation, and it is strictly forbidden to turn the wooden box upside down. 2) During the transportation and unpacking of the ICI Pilling and Snagging Test Chamber, try to prevent shocks or severe vibrations. When unpacking, first remove the box cover, and then remove the four ...
1. Automatic Wascator Shrinkage Tester leakage: Check that the inlet, drain joint or drain valve is properly installed. 2. Abnormal internal gallbladder rotation sound or motionless or show abnormal motor (ALM.M) Check the frequency converter for failure or alarm. Check to see if there is an abnormal jam in the rotating device. 3. The interface shows the inflow anomaly (ALM.I) Check if the water l...
AATCC Crockmeter (Rubbing Fastness Tester) is used to determine the colour fastness of textiles after dry or wet rubbing, suitable for coloured fabric, coated, printed and dyed textiles. Do you want to know more about the AATCC Crockmeter? Included Standard Accessories AATCC rubbing cloth 1box Sand paper 2pcs Rings 2pcs Included Option Accessories Gray scale for color staining More about AATCC Cro...
Calibration procedure of Bean Bag Snag Tester 1. I. Calibration items: speed 2. Calibration equipment: electronic stopwatch 3. Calibration period: one year 4. Calibration steps: Speed correction method: i. Turn on the power of the machine and set the test times to be greater than 20 times. ii. Press the Start button to turn on the machine and let the stopwatch count. iii. When the stopwatch reache...
1. The power supply should use a separate socket, the grounding line in the socket must be reliably grounding. 2. Rotary Tumble Dryer can not be installed in the open air and too wet environment, otherwise the electrical parts affected by humidity will easily cause fire damage or other failures. If the Fabric Tumble Tester is accidentally drenched with water or leaked into the water, it must be ve...
Install of Fryma Fabric Extensiometer 1. Place the Frymer extension meter on a platform at least 1.5m above the ground. 2. One end of the pulley should be placed on the edge of the platform to facilitate the hanging of weights. Operation steps of Frymer Extension and Recovery Meter 1. Install the processed sample on the sample holder. The sample should be as flat as possible to avoid wri...