+8615280858852
1. Application Martindale Abrasion and Pilling Tester was developed primarily to assess abrasion resistance of woven worsted wool fabrics. It can also be used to determine the wool fabric pilling performance under slight pressure. Not available in thickness of more than 3mm of wool fabric. It can also be used to determine the wool fabric pilling performance under slight pressure. Its display uses ...
Color Matching Cabinets is used to proof the color deviation of the goods. Widely used in textiles, clothing, printing, dyeing, plastic, leather, electronic products industry. 1) Provide several light sources, i.e. D65, TL84, CWF, UV, F/A, U30 2) Apply microcomputer to switch between the light sources quickly. 3) Super timing function to record use time of each light source separately. 4) All fitt...
Application Snagging Assessment Box is suitable for all scoring test rating standards. The sample and standard sample are illuminated under the designated light source to compare the rating results. Feature 1. The 12V 55W quartz halogen lamp tube is used as the standard light source, and the lamp housing adopts a finier lens to make the light parallel, so that the illuminance is stable and accurat...
Martindale Abrasion and Pilling Tester was developed primarily to assess abrasion resistance of woven worsted wool fabrics. Martindale Test Machine For Fabric can also be used to determine the wool fabric pilling performance under slight pressure. Martindale Abrasion Test Equipment can be used to determine the wool fabric pilling performance under slight pressure, too. Do you want to know more abo...
1. Circular Locus Pilling Tester structure 2. Circular Locus Pilling Tester working principle Under the specified speed and pressure, nylon brush and fabric are used as abrasives, and the sample runs in a circular trajectory and rubs against the abrasives to make the sample rub and fuzz. Finally, the samples were evaluated by visual description of pilling performance under standard light source. 3...
Testing method Take out the square on the left side of Lab Pilling Assessment Box, place the sample flat in the recess, and place a chart on the right side of the recess for comparison. Observe the sample and the chart with a line of sight perpendicular to the surface of the sample to judge the level of the condition of the sample surface. Steps 1. Put ICI Assessment Box on a flat table. 2. Turn o...