+8615280858852
Please add the lube to the belt pulley axletree and rotating member to make it working well. Please clean the Fabric Pilling Tester face everyday after your test, and you should spray the rust preventing oil regularly. Please check the tightness of the Random Pilling Tester’s belt regularly, and adjust or change the new belt of same standard depending on the circumstance. AVENO Machine R...
1. How can I elongate the use life of lamp? The use life of lamp is decided by actual use time and use time. For example, in case user need to use lamp for long time and power on and off lamp and switch functions in a day for many times, the use life of lamp is reduced. When you want power on and off lamp cabinet for several times in an hour, don`t power off the lamp cabinet. Generally, powering o...
Martindale Abrasion and Pilling Tester is developed primarily to assess abrasion resistance of woven worsted wool fabrics. It can also be used to determine the wool fabric pilling performance under slight pressure. Not available in thickness of more than 3mm of wool fabric. It can also be used to determine the wool fabric pilling performance under slight pressure. The heavy hammer and key componen...
ICI Pilling and Snagging Tester is used to determine the surface fuzzes and pilling properties of both woven and knitted materials. It complies in full with the requirements of EN ISO 12945-1 and BS 5811, etc.. Product details AVENO Machine Recommend: AG05 ICI Pilling and Snagging Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenot...
1. The sample is parked in the laboratory environment for more than 8 hours 2. Cut a sample at the flat part of the sample, if it is an insole, it should be cut to the transfer part 3. Remove the load and load shaft from the testing machine 4. Remove the top plate and test fixture 5. Device for the sample: Loosen the fixing ring on the test fixture, remove the sample tablet, place the sample in th...
It is strictly forbidden to put debris in the color light box to avoid damage to the neutral gray of the inner wall, which will cause errors in color matching. Do not start the lamp too frequently, otherwise it will affect the life of the lamp. The distribution of various light sources in the machine must be installed according to the "lamp distribution map" to obtain a uniform and sufficient ligh...