+8615280858852
Color Matching Cabinets is used to proof the color deviation of the goods. Widely used in textiles, clothing, printing, dyeing, plastic, leather, electronic products industry. 1) Provide several light sources, i.e. D65, TL84, CWF, UV, F/A, U30 2) Apply microcomputer to switch between the light sources quickly. 3) Super timing function to record use time of each light source separately. 4) All fitt...
Application Snagging Assessment Box is suitable for all scoring test rating standards. The sample and standard sample are illuminated under the designated light source to compare the rating results. Feature 1. The 12V 55W quartz halogen lamp tube is used as the standard light source, and the lamp housing adopts a finier lens to make the light parallel, so that the illuminance is stable and accurat...
Testing method Take out the square on the left side of Lab Pilling Assessment Box, place the sample flat in the recess, and place a chart on the right side of the recess for comparison. Observe the sample and the chart with a line of sight perpendicular to the surface of the sample to judge the level of the condition of the sample surface. Steps 1. Put ICI Assessment Box on a flat table. 2. Turn o...
AVENO can customize the machine, such as ICI Pilling and Snagging Tester, and the cabinet can be customized, as shown in the figure: ICI Pilling and Snagging Tester is used to determine the surface fuzzes and pilling properties of both woven and knitted materials. It complies in full with the requirements of EN ISO 12945-1 and BS 5811, etc .. The optional pilling drum are: A) Square pilling test b...
1) ICI Pilling and Snagging Tester is packed in a whole box. The wooden box is not allowed to lie on its side during transportation, and it is strictly forbidden to turn the wooden box upside down. 2) During the transportation and unpacking of the ICI Pilling and Snagging Test Chamber, try to prevent shocks or severe vibrations. When unpacking, first remove the box cover, and then remove the four ...
1) Before the ICI Mace Snag Tester experiment, first place a sufficiently large fabric sample to be tested in a temperature of 20 ± 2 ° C and a relative humidity of 60% ± 2% for 24 hours. 2) From the fabric to be tested, parallel warp at a distance of 1/10 of the width, and cut out two pieces of samples with a size of 200mm × 330mm in the weft direction without damage or defects. 3) At the middle ...