+8615280858852
Please add the lube to the belt pulley axletree and rotating member to make it working well. Please clean the Fabric Pilling Tester face everyday after your test, and you should spray the rust preventing oil regularly. Please check the tightness of the Random Pilling Tester’s belt regularly, and adjust or change the new belt of same standard depending on the circumstance. AVENO Machine R...
1. Sample Preparing Every sample should be put in the environment with temperature 20~250℃ and humidity 20~70% for more than 4 hours. 2. Testing Procedure 2.1. Keep the sample shape and static without moving. 2.2. Remove the test part from the entire toy in order the Toy Safety Sharp Edge Tester can touch it, but must keep the original rigidity. 2.3. The beginning and end of the PTFE tape can be c...
1. Always keep the Taber Abrasion Tester clean and tidy by wiping the Taber Abrasion Resistance Tester with cotton cloth. 2. The metallic surface shall be applied with anti-rust oil. 3. Fill lubricating oil for the moving parts at regular intervals. AVENO Machine Recommend: AF46 Taber Abrasion Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skyp...
1.No difference in nozzle pressure difference or sample differential pressure value or excessive value ▲Check if the motherboard sensor is loose. If it is loose, please insert it firmly. ▲Whether the Air Permeability Tester is not turned on, please click the clear button on the work interface. 2.There was no significant increase in pressure during the experiment. ▲Is the air tube before the sensor...
UV Accelerated Weathering Tester can simulate the damage caused by ultraviolet light, Rain Water and dew, test sample through exposing the sample to the alternating cycle of light and water under controlled high temperature. It uses ultraviolet light tubes to simulate the radiation of sunlight, use condense water and water spray to simulated dew and Rain Water. Widely used to selection of new mate...
Bursting Strength Tester is used to determine the expansion force and divergence rate of fabric, woven, knitted fabrics, non-woven, paper and board. Standards Of Bursting Strength Tester ASTM3786-06, ISO2758/13938-1, BS 3424/3137, BS 4768, AS2001.2.4, GB/T 7742, IWSTM 29, EDA NA 80.4-02/80.3-99, NEXT 22 2206, FZ/T60019, JIS L 1018.6.17, BS-2922, FZ/T 60019, FZ/T 01030, JIS L 1018.6.17. AVENO ...