+8615280858852
We have 20 years in production physical testing machines, helped our customer built more than 15 labs all over the world. Our technician can provide total testing solution according customer requirement. Our main products including: 1. Universal Testing Equipment(including Tensile tester, Hum.&Temp. chamber, Salt spray tester, etc.) 2. Textile Testing ...
Under standard light source, compared with standard sample photo and the sample after test, then get the pilling degree, it is called sample photo method. Sample photo method adopt 1-5 grades, 1 grade is the most serious pilling degree, 5 grade means the pilling resistance of sample is the best. Machine Recommend: AG06 Pilling Assessment Box
Calibration Item: Spring scale,speed. Calibration Appliance: Standard weight,electronic stopwatch. Zipper Durable Instruments Calibration Procedure: 1.Calibration method of spring scale: 1.1 Remove spring scale from the Zipper Fatigue Tester. 1.2 Calibrate the difference value between the weight of spring scale and standard weight by standard weight,and calculate the error value. 2. Speed calibrat...
Hi friends, December is not only AVENO discount month, but also is AVENO Thanksgiving Feedback Month. Within this time, we will offer best discount base on best quality, as a thanksgiving feedback to our customer, thanks the always support of all of you to AVENO. Thank you. If you have any inquiry, please contact us, our team is looking forward to serve you better. Sales Dept Tel: +86 1528085...
Please add the lube to the belt pulley axletree and rotating member to make it working well. Please clean the Fabric Pilling Tester face everyday after your test, and you should spray the rust preventing oil regularly. Please check the tightness of the Random Pilling Tester’s belt regularly, and adjust or change the new belt of same standard depending on the circumstance. AVENO Machine R...
1. Sample Preparing Every sample should be put in the environment with temperature 20~250℃ and humidity 20~70% for more than 4 hours. 2. Testing Procedure 2.1. Keep the sample shape and static without moving. 2.2. Remove the test part from the entire toy in order the Toy Safety Sharp Edge Tester can touch it, but must keep the original rigidity. 2.3. The beginning and end of the PTFE tape can be c...