ISO 8124-1 ASTM F963 EN 71-1 Toy Safety Sharp Edge Tester AT25
Toy Safety Sharp Edge Tester is used to evaluate whether accessible edges on toys or other products are likely to cause injury.
+8615280858852
Feeler gauge with a thickness of (0,4 ± 0,02) mm and an insertion edge radius of approximately 3 mm.
model :
ATB40Brand:
AVENOorigin:
ChinaLead Time:
3days, in stockport:
Xiamen portPayment:
T/T, L/Ccertificate:
CE ISO9001 ISO17025standard:
EN-71-1 section 8.4.1.3ATB40- Feeler Gauge
Application Of Feeler Gauge
Feeler gauge with a thickness of (0,4 ± 0,02) mm and an insertion edge radius of approximately 3 mm.
Test method Of Feeler Gauge
If the component to be tested cannot be gripped between thumb and forefinger, establish whether it is grippable by inserting the feeler gauge between the component and the underlying layer or body of the toy at an angle between 0° and 10° from the toy surface using a force of (10 ± 1) N. If the gauge can be inserted more than 2 mm, the component shall be considered as grippable.
Standards Of Feeler Gauge
EN-71-1 section 8.4.1.3
Key Specification Of Feeler Gauge
|
Model |
ATB40 Feeler Gauge |
|
Material |
Stainless steel |
|
Feeler gauge thickness |
0.4mm |
|
Insertion edge radius |
3mm |
|
Dimension |
1.5*1.5*4.0cm |
|
Weight |
0.1kg |
Glove Impact Testing Equipment used to test the impact resistance of gloves, motorcycle protective clothing, knee pads, etc. During the experiment, lift the impact hammer to the height of the required impact energy, release the impact hammer, and drop it along a vertical guide path onto the sample placed on the test anvil. The center axis of the falling hammer coincides with the center axis of the anvil. Record the peak force of the impact test and check whether the sample is torn or perforated.
read moreSeat Belt Friction Tester is used to simulate the pilling changes of clothing caused by seat belt friction.
read moreAccording to the bending force of the sample, according to the standard spacing and load weight requirements, perform reciprocating bending resistance under the specified testing speed conditions, observe whether there are cracks, coating peeling, adhesive delamination and other abnormal quality conditions on the surface, suitable for belt, shoulder strap, luggage soft lift and other belt products
read moreDouble row LCD display, front and rear two display screen. Rechargeable battery. Weighing, peeling, counting, unit conversion. RS232 data interface, linking computers and printers.
read moreAlcohol Rubber Abrasion Tester used for glass cover plates, films, plastics, automotive parts, rubber, leather and textiles, electroplating, freely detachable components, paints, printed patterns and other products.
read more
online service
+8615280858852
sales@avenotester.com
+8615280858852