ISO 8124-1 ASTM F963 EN 71-1 Toy Safety Sharp Edge Tester AT25
Toy Safety Sharp Edge Tester is used to evaluate whether accessible edges on toys or other products are likely to cause injury.
+8615280858852
Energy Impact Test Hammer according to the corresponding clauses of IEC60068-2-75, GB/T2423.55-2006, GB4706.1, GB8898 and GB7000, IEC884 and UL1244. It is mainly used to inspect housings, operating rods, handles, etc. of household and similar electrical products. The ability of housings such as knobs and indicator lights to withstand mechanical shocks.
model :
ATB43Brand:
AVENOorigin:
ChinaLead Time:
3days, in stockport:
Xiamen portPayment:
T/T, L/Ccertificate:
CE ISO9001 ISO17025ATB43-Energy Impact Test Hammer
Application Of Energy Impact Test Hammer
Energy Impact Test Hammer according to the corresponding clauses of IEC60068-2-75, GB/T2423.55-2006, GB4706.1, GB8898 and GB7000, IEC884 and UL1244. It is mainly used to inspect housings, operating rods, handles, etc. of household and similar electrical products. The ability of housings such as knobs and indicator lights to withstand mechanical shocks.
Principle Of Energy Impact Test Hammer
The spring impactor mainly generates standard energy through the standard mass of each element and the movement of the hammer head spring. When the operating handle is pulled, the release claw falls on the release point of the impact element, and the hammer spring is compressed. When the compression amount is different, the spring Different energy will be released. Select the corresponding energy for the end cap of the multi-speed impactor knob. The energy has been calibrated on the energy calibration device at the factory.
Key Specification Of Energy Impact Test Hammer
Model |
ATB43-0.2 |
ATB43-0.35 |
ATB43-0.5 |
ATB43-0.7 |
ATB43-1.0 |
Impact energy |
0.2±0.02 N.m |
0.35±0.03 N.m |
0.5±0.04 N.m |
0.7±0.05 N.m |
1.0±0.05 N.m |
Impact component weight |
250g |
||||
Body weight |
1250g |
||||
Hammer head weight |
60g |
Liquid Leak Test Needle is used to test leakage of liquid stuffed toys.
read moreThe yarn hairiness tester is used to measure and analyze the hairiness index of yarn, and automatically test and statistically analyze the length, quantity, and distribution of hairiness. Can test different kinds of yarn including short fiber yarns made from cotton, wool, linen, silk, synthetic fibers, and their blends.
read moreASTM D3985 Oxygen Gas Transmission Rate Tester suitable for measuring the oxygen permeability performance of high barrier materials such as plastic film, aluminum foil plastic film, waterproof material, metal foil, etc.
read moreUV Integrator used to measure the UV energy of an exposure device. The main sensor of the measuring instrument is located on the back of the measuring instrument, with a measurement range of 250-410 nanometers. When measuring, it can be directly displayed on the display screen on the front of the UV energy meter and read out (in millijoules per square centimeter).
read moreAF46B Taber Abrasion Tester is used for abrasion resistance test of cloth, paper, paint, plywood, leather, natural rubber, etc.
read more