+86 15280858852
Handle Torque Resistance Tester is suitable for evaluating the distortion resistance of kitchen handle after heating.
model :
AD10Brand:
AVENOorigin:
ChinaLead Time：
10-20daysport:
Xiamen portPayment:
T/T, L/Ccertificate:
CE ISO9001 ISO17025standard:
EN 12983-1AD10-Handle Torque Resistance Tester
Application Of Handle Torque Resistance Tester
Handle Torque Resistance Tester is suitable for evaluating the distortion resistance of kitchen handle after heating.
Principle Of Handle Torque Resistance Tester
After the specimen is treated at high temperature, a certain torque is applied to the handle to check whether the specimen is torsional.
Standards Of Handle Torque Resistance Tester
EN 12983-1
Key Specification Of Handle Torque Resistance Tester
|
Model |
AD10 Handle Torque Resistance Tester |
|
Equalizing bar |
Weight distance 1m between left and right suspension points |
|
Load weight |
1kg |
|
Angle scale |
±40° |
|
Load time |
30s |
|
Dimension |
103x55x35cm |
|
Weight |
45kg |
Handle Bending Strength Tester is used to test the handle bending strength of cooker.
Universal Scratch Tester is applicable to all kinds of man-made board manufacturing enterprises and quality inspection departments.
Knife Edge Tester is according BS EN ISO 8442-5, be used to do knife sharpness test.
Knife Tool Anti-rust tester is used for testing the corrosion resistance of metal knife tools and related materials.
Rolling Plane Concavity Tester is used to measuring the recess of the bottom of the pot (thermal shock deformation).
Base Stability Under Shock Conditions Tester is used to assess the deformation of the bottom of the pot when the pan is hit by cold water.
Cooking Pot Pouring Tester is suitable for assessing the leakage of the pot when it is tipped.
Pot Coating Pencial Hardness Tester is mechanical, three points contact with the measured surface (two points wheel, one point lead core) always guarantees the pencil and the measured surface to form 45 °angle, with the hand to push the instrument motion, you can complete the testing process.
Mask Bacterial Filtration Efficiency (BFE) Detector Tester based on the working environment of negative pressure biosafety cabinet is adopted, which is safe and convenient to use, and the quality is controllable.
read more
When test, a test piece taken from the ankle protective area of the upper is subjected to an impact test and the transmitted force measured.
read more
Protective Clothing Blood Penetration Tester is used to test the resistance of synthetic blood to synthetic blood penetration under different test pressures.
read more
Mask Filter Material Performance Tester (PFE Particulate Filtration Efficiency Tester) is used to quickly and accurately detect the flow and other performance indicators of various planar materials, such as glass fiber, PTFE, PET and PP with efficiency, resistance and filtration speed features.
read more
Curtain Flame Propagation Tester is according to NFPA 701-1 fire test, suitable for fabric and for door-curtain window-curtain, bed-curtain, or other window shielding materials, shade shed, tent, tarpaulin and similar building fabric structures and banners, etc.
read more
Aug 18, 2019In life, most people choose to send valuable clothes to dry cleaning. They think that dry cleaning can not only wash away stains, but also keep the clothes beautiful. However, in actual life, the dry cleaning of the clothes may also cause discoloration or staining of light parts. Today, we will work together to understand the test methods for fastness to dry cleaning and the product standards for common clothing to assess the fastness to dry cleaning. What is dry cleaning? Dry cleaning refers to the washing of clothes with organic chemical solvents, including a dry and dry washing method that removes oil or stains. Color fastness to dry cleaning Common methods for testing the color fastness of dry cleaning in the laboratory are: GB/T 5711-2015 "Textile fastness test for color fastness to dry cleaning of tetrachloroethylene" ISO 105 D01:2010 "Textile—Tests for colour fastness-Part D01:Colour fastness to drycleaning using perchloroethylene solvent" Experiment procedure The above two standard test methods are the same, and the test steps are as follows: Step 1: Increase the water temperature of the water bath in the mechanical device to a test temperature of 30 °C. Step 2: preparing a combined sample, the sampling size is 40 mm × 100 mm. The test object can be a garment, a fabric, a yarn or a loose fiber. Step 3: Stitch two undyed square cotton twills along three sides to make a bag with an inner dimension of 100mm×100mm, and put a combined sample and 12 stainless steel wafers into the bag for any convenience. The form of the closed pocket. Step 4: Place the bag containing the combined sample and the stainless steel disc in a stainless steel container. Step 5: Add 200 mL of tetrachloroethylene to a stainless steel container (at a temperature of 30 ° C) in a fume hood. Step 6: Cover the stainless steel container, put it into the mechanical device, start the operation, and treat it in a water bath at 30 ° C for 30 min. Step 7: Take out the bag from the container, take out the sample, squeeze or centrifuge to remove excess solvent, and hang the sample in a ventilator for drying. Step 8: The original sample and the original lining fabric are used as reference samples, and the discoloration of the sample and the staining of the lining fabric are evaluated by a gray sample card or instrument. AVENO Machine Recommend: AC10 Water Colour Fastness Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
Jul 28, 2019Mouth-actuated Toys Endurance Tester is used to test the safety performance of mouth-actuated toys. The Mouth-actuated Toys Endurance Tester blows out and inhales a certain volume of gas of the toy at a certain speed for 10 times. After testing, determination if the toy and the parts spliting away off are small parts. Standards EN-71-1 section 8.17.2 ISO 8124-1 section 5.20 ASTM F963 section 8.13 GB 6675.2 section 5.20 AVENO Machine Recommend: AT26 Mouth Toy Endure Tester (Mouth-actuated Tester) Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
Jul 26, 2019Fabric Air Permeability Tester is used to determine the air permeability properties of fabric, suitable for many kinds of textile fabrics, including industrial fabrics, textile products such as non-wovens and other breathable materials. Feature Use high-precision pressure and differential pressure sensor detection to ensure accurate data. Microcomputer processing, direct display test results, no need to manual table checking and calculation. Built-in continuous test mode, the testing unit can be switched according to need. can be operated online with the computer host computer, automatically draw real-time test data curve, easy to observe. We have two model, AG18A and B, AG18A is manual change nozzle, AG18B can automatic change nozzle, you can choose what you prefer. AVENO Machine Recommend: AG18A Digital Air Permeability Tester AG18B Automatic Air Permeability Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
Jun 19, 2019Hydrostatic Head Pressure Tester is used to determine the water penetration resistance of all kinds of fabrics used for waterproofing, such as canvas, coating cloth, tent cloth, tarpaulin, rainproof clothing and geotextile materials, etc. According to the required experimental method, the parameters of the working mode such as pressurization, constant pressure timing, constant pressure timing, flexural experiment, water leakage and water leakage can be set. After each setting is completed, click to confirm and enter the working interface for experimental test. [P Rise]: Set the test sample, pressure unit, sample area, and pressurization rate. [Const P & Timing]: Set the test sample, pressure unit, sample area, pressurization rate, and end point pressure. [Const P & Time]: Set the pressure unit, sample area, pressurization rate, end point pressure, and constant pressure time. [Water Penetration]: Set the pressure unit, sample area, end point pressure, and pressure rate. [Fatigue]: Set the pressure unit, sample area, end point pressure, pressurization rate, constant pressure time, and experimental period. AVENO Machine Recommend: AG17B Hydrostatic Head Pressure Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
Jun 17, 20191 Sample Preparation Sample and standard friction white cloth should be in such environment of constant temperature and humidity to humidify. When the sample has many kinds of colors, should make all colors rubbed. If the size of a variety of colors is large enough , should be sampled Respectively. Cutting sample, do dry friction and wet friction respectively, should be ensured to rub to all colors. If the positive and negative of specimen is made up of different material , colors. So the both positive and negative need to do friction colo fastness test. Doing dry and wet fastness of friction should not be repeated in the same part in the specimen. 2 Dry Friction Flatly put sample on the friction apparatus placing sandpaper, make the length of the specimen is in line with the direction of the moning track of the equipment, and fix sample on the pressuring plate, the folder should be flat. Standard friction small white cloth fix on the friction head, clamp it tightly with spring clamp, lightly place friction head on the specimen. Ensure the specimen without sliding or wrinking when rubs Place friction head on the specimen, connect to he power, open the POWER button, set the times of testing. Press START button to begin the test, when the tests reaches the setting value, the instrument automatically stops. Remove the standard white cotton cloth , going to rate contrasting to color cards. 3 Wet Friction Completely soak standard friction small white cloth in distilled water. After removing, clamp in the filter paper to extrude in order to have a certain degree of water content. The remaining steps is same as the dry friction test. AVENO Machine Recommend: AC04 AATCC Electronic Crockmeter Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
Jun 12, 2019Scorch & Sublimation Tester used to test the ability to resist changes or shifts in color of textile under heating condition. Simulate the dyeing sublimation grade of fabric when ironing and under high temperature and humidity in daily life. AVENO new design Scorch & Sublimation Tester (Model: AC09) have 1, 2 and 3 test position for customer choose, meet ISO 105. BS 1006, AATCC 92, 114, 117, 133 DIN 54022/54060, GB/T 5718, GB/T 6152. With Beautiful look and safety and convenient design concept. AVENO Machine Recommend: AC09 Scorch & Sublimation Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
online service
+86 15280858852
sales@avenotester.com
sales@avenotester.com
+86 15280858852
