ISO 8124-1 ASTM F963 EN 71-1 Toy Safety Sharp Edge Tester AT25
Toy Safety Sharp Edge Tester is used to evaluate whether accessible edges on toys or other products are likely to cause injury.
+8615280858852
Horizontal and Vertical Flame Chamber is used to test the flammability of toys, textiles, plastics, and other nonmetallic materials.
model :
AT21Brand:
AVENOorigin:
ChinaLead Time:
10-20daysport:
Xiamen portPayment:
T/T, L/Ccertificate:
CE ISO9001 ISO17025standard:
UL 94, IEC 60695-11, IEC 60950, IEC 707, GB/T 2408, GB/T 5169, ISO 9772.3, ISO 1210, ASTM D635, D3801, D4804, D4986.AT21-Horizontal and Vertical Flame Chamber
Application Of Horizontal and Vertical Flame Chamber
Horizontal and Vertical Flame Chamber is used to test the flammability of toys, textiles, plastics, and other nonmetallic materials.
Test Principle Of Horizontal and Vertical Flame Chamber
Sample in a horizontal or vertical state should be burned at regular intervals several times for a certain flame height and a certain flaming angle, then according ignite, burning duration, and whether the ignition material under the sample is ignited to assessment of its combustibility and risk.
Feature Of Horizontal and Vertical Flame Chamber
Standards Of Horizontal and Vertical Flame Chamber
UL 94, IEC 60695-11, IEC 60950, IEC 707, GB/T 2408, GB/T 5169, ISO 9772.3, ISO 1210,
ASTM D635, D3801, D4804, D4986.
Key Specification Of Horizontal and Vertical Flame Chamber
Model |
AT21 Horizontal and Vertical Flame Chamber |
Chamber internal volume |
0.8m2 |
Chamber internal dimension |
120*60*112cm |
Flame height adjust range |
10-200mm |
Gas flow adjust range |
20-1000mm/min |
Gas pressure difference adjust range |
5-200 spout |
Flame angle adjust range |
0-45degree |
Burner height adjust range |
50mm |
Sample vertical move range |
450mm |
Sample horizontal move range |
180mm |
Burning time |
0.00-99.99s |
Residual flame time |
0.00-99.9s |
Time precision |
0.01s |
Power supply |
AC220V, 50/60HZ |
Dimension |
120*60*115cm |
Weight |
125kg |
Accessories Of Horizontal and Vertical Flame Chamber
Standard Accessories |
Flame height calibration scale |
1pc |
Sample angle calibration fixture |
1set |
|
Horizontal combustion test fixture |
1set |
|
Vertical combustion test fixture |
1set |
The Lab Twister with counter is used for making small samples. The dyed loose fibers are twisted into yarn by this machine, which can be combined or used to weave sheets to judge the dyeing effect and other indicators. This model has a counter to complete the counting.
read moreYarn Abrasion Tester is mainly suitable for the determination of wear resistance of textile materials such as single yarn and ply yarn.
read moreThis Fiber Specific Resistance Meter can measure the specific resistance of various chemical fibers and is one of the important instruments for measuring the spinnability of chemical fibers. Based on the pointer-type fiber specific resistance meter, it adopts high-resistance operational amplifier and digital display technology to make the test data more accurate, stable, and rapid, and the operation is easier. It is suitable for measuring the specific resistance of chemical fibers in scientific research, fiber inspection, production and use of chemical fibers, etc.
read moreJN-B Precision Torque Balance is a sensitive precision measuring instrument that can measure extremely slight weights. It has simple operation and can directly and quickly read the measured value without weights. It is the weighing and precision of micro-materials in the textile industry special balance for analysis.
read moreFibrograph Tester is designed according to the theory of random distribution of cotton fiber length and the principle that the light intensity passing through the fiber bundle is negatively correlated with the number of fibers in the fiber bundle section.
read more