f g in y p b t

+86 15280858852

sales@avenotester.com

Englishen españoles portuguêspt

Products

Home / Textile Test Equipment / Yarn & Fiber Tester /

Lea Strength Tester AY16

Lea Strength Tester AY16

Lea Strength Tester is used to test lea strength of different kinds of yarn, also can test pure and blending yarn of Cotton, wool, chemical fiber.

  • model :

    AY16
  • Brand:

    AVENO
  • origin:

    China
  • Lead Time:

    10-20days
  • port:

    Xiamen port
  • Payment:

    T/T, L/C
  • certificate:

    CE ISO9001 ISO17025
  • standard:

    GB/T 8696, ISO 6939
  • Product Detail

AY16-Lea Strength Tester


Application Of Lea Strength Tester

Lea Strength Tester is used to test lea strength of different kinds of yarn, also can test pure and blending yarn of Cotton, wool, chemical fiber.

  1. LCD controller, analysis of test results provides test data.
  2. AC servo drive for wide range speed setting
  3. Can connect to PC and printer, can get breaking strength and elongation at any point.


Standards Of Lea Strength Tester

GB/T 8696, ISO 6939


Key Specification Of Lea Strength Tester

Model

AY16 Lea Strength Tester

Control mode

LCD control

Strength capacity

0-2500N

Test precision

≤0.2%F·S

Test speed

10-600mmmin

Effective stroke

120mm

Clamp distance

50-500mm

Yarn hook width

8, 12, 16, 20, 24, 28, 32

Power supply

AC220V, 50/60HZ

Dimension

50*50*140cm

Weight

145kg


send a message
Hello friends, please leave us a message for us to serve you better. Thank you.
Any questions we will reply you whith in 24 hours. Best wishes.
related products
Electronic Twist Tester

Electronic Twist Tester AY04

Electronic Twist Tester is used to measure the twist, degree of inhomogeneity of yarns in certain lengths of cotton, wool, linen, and silk, and the twisting and shrinkage of strands, as a basis for assessing product quality and improving the production process.

Electronic Wrap Reel Tester

Electronic Wrap Reel Tester AY01

Electronic Wrap Reel Tester Used in the textile, knitting, printing and dyeing, clothing and other industries to accurately determine the length of the yarn for the determination of the linear density or count of textile yarn.

Yarn Examining Machine

Yarn Examining Machine AY02

Electric reeling machine used for accurate determination of the length of the yarn for the determination of the linear density or count of the textile yarn and for the strength test of the yarn.

Manual Twist Tester

Manual Twist Tester AY03

Manual Twist Tester is used to determine the number of twists of various yarns such as cotton, wool, hemp, and silk within a certain length to assess the quality of the product so as to correct the problems in the production process.

Single Yarn Strength Tester

Single Yarn Strength Tester AY05  

Single-Yarn Strength Tester is used to measure the breaking strength and breaking elongation of single yarns, synthetic filaments and textured yarns of cotton, wool, hemp and core yarns.

Electronic Single Yarn Strength Tester

Electronic Single Yarn Strength Tester AY06

Electronic Single Yarn Strength Tester is used for testing the breaking strength and elongation of a single yarn and fiber pure yarn or blended yarn of cotton, wool, hemp, silk, chemical fiber and core yarn.

Multifunction Yarn Humidity Meter

Multifunction Yarn Humidity Meter AY09

Multifunction Yarn Humidity Meter is a high-precision, high-performance intelligent moisture measurement instrument.

Digital Tension Meter

Digital Tension Meter AY08

Digital Tension Meter is used to measure the dynamic tension of various flexible yarn material. It is equipped with a digital display device and a movable clamping device that can be carried around for inspection.

Product Categories

new Products

  • Constant Temperature Magnetic Stirrer

    Constant Temperature Magnetic Stirrer AH12

    Constant Temperature Magnetic Stirrer with low noise speed, regulation is stable, temperature can be controlled, temperature number is intuitionistic and accurate.

    read more
  • Scrub Abrasion Tester

    Scrub Abrasion Tester AH04-2

    Scrub Abrasion Tester is an instrument for evaluating the scrub resistance of paints. It also can evaluate the performance of any film composite treated surface, such as paint, plating, flooring, overlay, wood density and so on.

    read more
  • Button Impact Resistance Tester

    Button Impact Resistance Tester AG12

    Button Impact Resistance Tester is used to determine the impact resistance of plastic sew-through flange buttons.

    read more
  • Hexapod Tumble Drum Tester

    Hexapod Tumble Drum Tester AG63

    Hexapod Tumble Drum Tester is used to test carpet products under the action of hexapod mechanical mode carpet surface structure changes and color changes.

    read more
  • Lux Tester

    Lux Tester ATC01

    Lex Meter, also named illuminometer, is a special instrument for measuring illumination. This model is portable and easy to operate, get result very fast.

    read more

latest news

Describe in detail the test method for fastness to dry cleaning
Describe in detail the test method for fastness to dry cleaningAug 18, 2019

Describe in detail the test method for fastness to dry cleaning

In life, most people choose to send valuable clothes to dry cleaning. They think that dry cleaning can not only wash away stains, but also keep the clothes beautiful. However, in actual life, the dry cleaning of the clothes may also cause discoloration or staining of light parts. Today, we will work together to understand the test methods for fastness to dry cleaning and the product standards for common clothing to assess the fastness to dry cleaning. What is dry cleaning? Dry cleaning refers to the washing of clothes with organic chemical solvents, including a dry and dry washing method that removes oil or stains. Color fastness to dry cleaning Common methods for testing the color fastness of dry cleaning in the laboratory are: GB/T 5711-2015 "Textile fastness test for color fastness to dry cleaning of tetrachloroethylene" ISO 105 D01:2010 "Textile—Tests for colour fastness-Part D01:Colour fastness to drycleaning using perchloroethylene solvent" Experiment procedure The above two standard test methods are the same, and the test steps are as follows: Step 1: Increase the water temperature of the water bath in the mechanical device to a test temperature of 30 °C. Step 2: preparing a combined sample, the sampling size is 40 mm × 100 mm. The test object can be a garment, a fabric, a yarn or a loose fiber. Step 3: Stitch two undyed square cotton twills along three sides to make a bag with an inner dimension of 100mm×100mm, and put a combined sample and 12 stainless steel wafers into the bag for any convenience. The form of the closed pocket. Step 4: Place the bag containing the combined sample and the stainless steel disc in a stainless steel container. Step 5: Add 200 mL of tetrachloroethylene to a stainless steel container (at a temperature of 30 ° C) in a fume hood. Step 6: Cover the stainless steel container, put it into the mechanical device, start the operation, and treat it in a water bath at 30 ° C for 30 min. Step 7: Take out the bag from the container, take out the sample, squeeze or centrifuge to remove excess solvent, and hang the sample in a ventilator for drying. Step 8: The original sample and the original lining fabric are used as reference samples, and the discoloration of the sample and the staining of the lining fabric are evaluated by a gray sample card or instrument. AVENO Machine Recommend: AC10 Water Colour Fastness Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com

AT26 Mouth Toy Endure Tester
AT26 Mouth Toy Endure TesterJul 28, 2019

AT26 Mouth Toy Endure Tester

Mouth-actuated Toys Endurance Tester is used to test the safety performance of mouth-actuated toys. The Mouth-actuated Toys Endurance Tester blows out and inhales a certain volume of gas of the toy at a certain speed for 10 times. After testing, determination if the toy and the parts spliting away off are small parts. Standards EN-71-1 section 8.17.2 ISO 8124-1 section 5.20 ASTM F963 section 8.13 GB 6675.2 section 5.20 AVENO Machine Recommend: AT26 Mouth Toy Endure Tester (Mouth-actuated Tester) Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com

AVENO-AG18 Fabric Air Permeability Tester
AVENO-AG18 Fabric Air Permeability TesterJul 26, 2019

AVENO-AG18 Fabric Air Permeability Tester

Fabric Air Permeability Tester is used to determine the air permeability properties of fabric, suitable for many kinds of textile fabrics, including industrial fabrics, textile products such as non-wovens and other breathable materials. Feature Use high-precision pressure and differential pressure sensor detection to ensure accurate data. Microcomputer processing, direct display test results, no need to manual table checking and calculation. Built-in continuous test mode, the testing unit can be switched according to need. can be operated online with the computer host computer, automatically draw real-time test data curve, easy to observe. We have two model, AG18A and B, AG18A is manual change nozzle, AG18B can automatic change nozzle, you can choose what you prefer. AVENO Machine Recommend: AG18A Digital Air Permeability Tester AG18B Automatic Air Permeability Tester    Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com

How to set the test method of Hydrostatic Head Pressure Tester?
How to set the test method of Hydrostatic Head Pressure Tester?Jun 19, 2019

How to set the test method of Hydrostatic Head Pressure Tester?

Hydrostatic Head Pressure Tester is used to determine the water penetration resistance of all kinds of fabrics used for waterproofing, such as canvas, coating cloth, tent cloth, tarpaulin, rainproof clothing and geotextile materials, etc. According to the required experimental method, the parameters of the working mode such as pressurization, constant pressure timing, constant pressure timing, flexural experiment, water leakage and water leakage can be set. After each setting is completed, click to confirm and enter the working interface for experimental test. [P Rise]: Set the test sample, pressure unit, sample area, and pressurization rate. [Const P & Timing]: Set the test sample, pressure unit, sample area, pressurization rate, and end point pressure. [Const P & Time]: Set the pressure unit, sample area, pressurization rate, end point pressure, and constant pressure time. [Water Penetration]: Set the pressure unit, sample area, end point pressure, and pressure rate. [Fatigue]: Set the pressure unit, sample area, end point pressure, pressurization rate, constant pressure time, and experimental period. AVENO Machine Recommend: AG17B Hydrostatic Head Pressure Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com

Operate Steps of Electronic Crockmeter
Operate Steps of Electronic CrockmeterJun 17, 2019

Operate Steps of Electronic Crockmeter

1 Sample Preparation Sample and standard friction white cloth should be in such environment of constant temperature and humidity to humidify. When the sample has many kinds of colors, should make all colors rubbed. If the size of a variety of colors is large enough , should be sampled Respectively. Cutting sample, do dry friction and wet friction respectively, should be ensured to rub to all colors. If the positive and negative of specimen is made up of different material , colors. So the both positive and negative need to do friction colo fastness test. Doing dry and wet fastness of friction should not be repeated in the same part in the specimen. 2 Dry Friction Flatly put sample on the friction apparatus placing sandpaper, make the length of the specimen is in line with the direction of the moning track of the equipment, and fix sample on the pressuring plate, the folder should be flat. Standard friction small white cloth fix on the friction head, clamp it tightly with spring clamp, lightly  place friction head on the specimen. Ensure the specimen without sliding or wrinking when rubs Place friction head on the specimen, connect to he power, open the POWER button, set the times of testing. Press START button to begin the test, when the tests reaches the setting value, the instrument automatically stops. Remove the standard white cotton cloth , going to rate contrasting to color cards. 3 Wet Friction Completely soak standard friction small white cloth in distilled water. After removing, clamp in the filter paper to extrude in order to have a certain degree of water content. The remaining steps is same as the dry friction test. AVENO Machine Recommend: AC04 AATCC Electronic Crockmeter Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com

New Design for AC09 Scorch & Sublimation Tester
New Design for AC09 Scorch & Sublimation TesterJun 12, 2019

New Design for AC09 Scorch & Sublimation Tester

Scorch & Sublimation Tester used to test the ability to resist changes or shifts in color of textile under heating condition. Simulate the dyeing sublimation grade of fabric when ironing and under high temperature and humidity in daily life. AVENO new design Scorch & Sublimation Tester (Model: AC09) have 1, 2 and 3 test position for customer choose, meet ISO 105. BS 1006, AATCC 92, 114, 117, 133 DIN 54022/54060, GB/T 5718, GB/T 6152. With Beautiful look and safety and convenient design concept. AVENO Machine Recommend: AC09 Scorch & Sublimation Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com

 
chat now please click here for inquiry
Any questions we will reply you whith in 24 hours. Best wishes.