ISO 8124-1 ASTM F963 EN 71-1 Toy Safety Sharp Edge Tester AT25
Toy Safety Sharp Edge Tester is used to evaluate whether accessible edges on toys or other products are likely to cause injury.
+8615280858852
Mouth-actuated Toys Endurance Tester is used to test the safety performance of mouth-actuated toys.
model :
AT26Brand:
AVENOorigin:
ChinaLead Time:
3-7 daysport:
Xiamen portPayment:
T/T, L/Ccertificate:
CE ISO9001 ISO17025standard:
EN-71-1, ISO 8124-1, ASTM F963, GB 6675.2AT26-Mouth Toy Endure Tester (Mouth-actuated Tester)
Application Of Mouth Toy Endure Tester (Mouth-actuated Tester)
Mouth-actuated Toys Endurance Tester is used to test the safety performance of mouth-actuated toys.
Principle Of Mouth Toy Endure Tester (Mouth-actuated Tester)
The Mouth-actuated Toys Endurance Tester blows out and inhales a certain volume of gas of the toy at a certain speed for 10 times. After testing, determination if the toy and the parts spliting away off are small parts.
Standards Of Mouth Toy Endure Tester (Mouth-actuated Tester)
EN-71-1 section 8.17.2
ISO 8124-1 section 5.20
ASTM F963 section 8.13
GB 6675.2 section 5.20
Key Specification Of Mouth Toy Endure Tester (Mouth-actuated Tester)
Model |
AT26 Mouth Toy Endure Tester (Mouth-actuated Tester) |
Test speed |
≥20r/min |
Test times |
10 times, can be set |
Test air pressure |
13.8Kpa, can be set |
Counting |
0~9999 times, can be set |
Barometer |
Digital display. Unit: Kpa, positive and negative pressure display |
Power Supply |
AC 220V 50/60Hz 3A |
Dimension |
22x56x30cm |
Weight |
35kg |
Accessories Of Mouth Toy Endure Tester (Mouth-actuated Tester)
Standard Accessories |
Test rubber tube 3size |
1pc/size |
Power |
1pc |
Related products
Kinetic Energy Tester Toy Safety Small Part Cylinder Toy Sharp Point Tester
https://www.avenotester.com/Kinetic-Energy-Tester-AT28_p124.html
https://www.avenotester.com/Toy-Safety-Small-Part-Cylinder-ATB01_p94.html
https://www.avenotester.com/Toy-Sharp-Point-Tester-ATB02_p95.html
Zipper Fatigue Tester is used to determine the life of metal or plastic zipper under condition of specified load and specified times of stretching cycle, test for zipper in a tension action of lateral and longitudinal, it could be tested its bearing ability in reciprocating motion for a regulation time.
read moreWeight Gantry Crane is used to assist in fixing the sample in the toy safety performance test, and can also be used to raise samples and test weights.
read moreDigital Internal Length Measurement is suitable for measuring the inner length of adult/child shoes.
read moreFlammability Testing Nailed Fixture is mainly used for testing the combustion performance of cloth toys and filling materials.
read more