AATCC Electronic Crockmeter AC04-3
AATCC Electronic Crockmeter is used to determine the colour fastness of textiles dry or wet rubbing, suitable for coloured fabric, coated, printed and dyed textiles.
+8615280858852
Scorch & Sublimation Tester used to test the ability to resist changes or shifts in color of textile under heating condition.
model :
AC09Brand:
AVENOorigin:
ChinaLead Time:
7 daysport:
Xiamen portPayment:
T/T, L/Ccertificate:
CE, ISO9001, ISO17025standard:
ISO 105-X11. BS 1006, AATCC 92, 114, 117, 133 DIN 54022/54060, GB/T 5718, GB/T 6152AC09-Scorch & Sublimation Tester
Application Of Scorch & Sublimation Tester
Scorch & Sublimation Tester used to test the ability to resist changes or shifts in color of textile under heating condition. Simulate the dyeing sublimation grade of fabric when ironing and under high temperature and humidity in daily life.
Test principle Of Scorch & Sublimation Tester
Scorch & Sublimation Tester can do sublimation fastness test under below three condition:
Dry pressure test: the dry sample under controlled temperature and weight, then heating a certain amount of time.
Damp pressure test: the dry sample wrap into wet and unstained cotton cloth, under controlled temperature and weight, then heating a certain amount of time.
Wet pressure test: the wet sample wrap into wet and unstained cotton cloth, under controlled temperature and weight, then heating a certain amount of time.
Standards Of Scorch & Sublimation Tester
ISO 105-X11. BS 1006, AATCC 92, 114, 117, 133 DIN 54022/54060, GB/T 5718, GB/T 6152
Key Specification Of Scorch & Sublimation Tester
|
Model |
AC09-1 |
AC09-2 |
|
Test position |
1 |
3 |
|
Heating platen surface area |
102*29mm, or custom made |
|
|
Temperature range |
RT-250℃ |
|
|
Test pressure |
4±1kpa |
|
|
Sample size |
120*40mm |
|
|
Power supply |
AC220V, 50/60HZ |
|
|
Dimensions |
39*28*17cm |
39*42*28cm |
|
Weight |
8kg |
15kg |
Accessories Of Scorch & Sublimation Tester
|
Standard Accessories |
Power line |
1pc |
|
English Operate manual |
1pc |
|
|
Operate video |
1pc |
|
|
Quality certification |
1pc |
Glove Impact Testing Equipment used to test the impact resistance of gloves, motorcycle protective clothing, knee pads, etc. During the experiment, lift the impact hammer to the height of the required impact energy, release the impact hammer, and drop it along a vertical guide path onto the sample placed on the test anvil. The center axis of the falling hammer coincides with the center axis of the anvil. Record the peak force of the impact test and check whether the sample is torn or perforated.
read moreSeat Belt Friction Tester is used to simulate the pilling changes of clothing caused by seat belt friction.
read moreAccording to the bending force of the sample, according to the standard spacing and load weight requirements, perform reciprocating bending resistance under the specified testing speed conditions, observe whether there are cracks, coating peeling, adhesive delamination and other abnormal quality conditions on the surface, suitable for belt, shoulder strap, luggage soft lift and other belt products
read moreDouble row LCD display, front and rear two display screen. Rechargeable battery. Weighing, peeling, counting, unit conversion. RS232 data interface, linking computers and printers.
read moreAlcohol Rubber Abrasion Tester used for glass cover plates, films, plastics, automotive parts, rubber, leather and textiles, electroplating, freely detachable components, paints, printed patterns and other products.
read more
online service
+8615280858852
sales@avenotester.com
+8615280858852