+8615280858852
1) Before the ICI Mace Snag Tester experiment, first place a sufficiently large fabric sample to be tested in a temperature of 20 ± 2 ° C and a relative humidity of 60% ± 2% for 24 hours. 2) From the fabric to be tested, parallel warp at a distance of 1/10 of the width, and cut out two pieces of samples with a size of 200mm × 330mm in the weft direction without damage or defects. 3) At the middle ...
Calibration procedure of Bean Bag Snag Tester 1. I. Calibration items: speed 2. Calibration equipment: electronic stopwatch 3. Calibration period: one year 4. Calibration steps: Speed correction method: i. Turn on the power of the machine and set the test times to be greater than 20 times. ii. Press the Start button to turn on the machine and let the stopwatch count. iii. When the stopwatch reache...
45 Degree Automatic Flammability Tester is used to determine flammability of textile under controlled conditions. Troubleshooting Of Automatic Flammability Tester Failure situation Possible reason Elimination method Turn on the power switch, the power switch indicator is off. The power is not input. The fuse is blown out. Ask an electrician to check and repair the power supply line. Repl...
AC02 Light Fastness Tester (water-cool) is a testing machine developed by our company according to the requirements of national standards and AATCC standards. The machine adopts the latest sensor technology and microcomputer control technology, and has the advantages of high measurement and control accuracy, high intelligence, stable and reliable performance; simple and clear interface, easy opera...
1 The Martindale Test Machine For Fabric case must be grounded and its grounding resistance should be less than or equal to 1Ω. 2 Do not bump the parts during handling, installation, adjustment and use to avoid mechanical damage and affect the test results. 3 The touch buttons in the Martindale Abrasion Test Equipment control panel can only be pressed with your fingers. Do not use other hard objec...
1. Use the fiber cutter provided by Aveno company to cut a proper amount of fiber to be tested. 2. Prepare clean glass slides and coverslips required for Fiber Content Analyzer testing. 3. Drop an appropriate amount of glycerin or paraffin oil on the glass slide. 4. Put the cut fibers on the glass slide and stir evenly to spread the fibers evenly. 5. Cover the cover glass and drive out the bubbles...