+8615280858852
1. The sample is parked in the laboratory environment for more than 8 hours 2. Cut a sample at the flat part of the sample, if it is an insole, it should be cut to the transfer part 3. Remove the load and load shaft from the testing machine 4. Remove the top plate and test fixture 5. Device for the sample: Loosen the fixing ring on the test fixture, remove the sample tablet, place the sample in th...
The production and manufacturing process of textiles are relatively complicated. The clothing that people wear actually undergoes countless processes before they change from cotton or yarn into fabric products. Among them, there are hundreds of types of textile and clothing testing. , For example, the water resistance test of textiles. The outdoor fabric industry is used to calling water pressure ...
The production and manufacturing process of textiles are relatively complicated. The clothing that people wear actually undergoes countless processes before they change from cotton or yarn into fabric products. Among them, there are hundreds of types of textile and clothing testing. , For example, to test the performance of air-permeable fabrics. Under the specified pressure difference condition, ...
In a standard laboratory, spray distilled water on the sample through a funnel, and compare the rating with a waterproof standard sample. Common test standards are American Standard: AATCC 22; European Standard: ISO 4920. There are three types of anti-splashing water: ordinary waterproof (WaterRepellent, abbreviated as: W/R), waterproof water (DurableWaterRepellent outdoor fabric industry is commo...
1. Application Bursting Strength Tester is used to determine the expansion force and divergence rate of fabric, woven, knitted fabrics, non-woven, paper and board. 2. Main feature 2.1. The hydraulic method is adopted to comply with the new national standard. 2.2. Touch screen control, the interface is simple and easy to understand, the operation is simple and intuitive, and the touch is sensitive....
1 The degree of expansion remains unchanged during the test: ▲Restart the instrument. ▲Check whether the test parameters are set correctly. 2 The experimental data results vary greatly. ▲Check the state of the instrument. The elastic diaphragm must be replaced when it is obviously deformed. AVENO Machine Recommend: AG10 Bursting Strength Tester Contact Us Now! Sales Dept Tel: +86 15280...