+8615280858852
Digital Tearing Tester is used for testing the tearing strength of all kinds of fabrics (Elmendorf Method), and the tearing resistance of thick paper, plastic cloth, electrical tape, etc. Do you want to know more about the Digital Elmendorf Tearing Tester? Included Standard Accessories Load 5sets (1A, 1B, 3C) Sample template 1pc English operation software 1pc Cable connect to PC 1set Power line &n...
Electronic Tearing Tester is used for testing the tearing strength of all kinds of fabrics (Elmendorf Method), and the tearing resistance of thick paper, plastic cloth, electrical tape, etc. Do you want to know more about the Paper Tearing Tester? Included Standard Accessories 32N load weight 1pc 64N load weight 1pc Sample Template 1pc English operation software 1pc Cable connect to PC 1pc Sp...
1. Prepare the test piece of Manual Fabric Stiffness Tester: 1) Use scissors to cut out the size of 25mm×200mm from the sample to be tested, with the long side of the sample facing the warp direction, the weft direction, and three samples each without damage and defects. If possible, samples in all directions should not contain the same number of warp (weft) yarns. 2) Specimen processing: All spec...
Manual Fabric Stiffness Tester is suitable for rigid flexibility test of cotton, wool, silk, hemp, chemical fiber and other woven fabrics, knitted fabrics and general nonwovens, coated fabrics, and other flexible materials, such as paper, leather, film and other flexible materials. Do you want to know more about the ASTM D1388 Stiffness Tester? Test angle 41.5° Press block length 200mm Press block...
Notice! There are new changes in the fuzzing and pilling rating regulations! Come see your fabric felt? With GB / T 4802.4-2020, ISO 12945-1: 2020, ISO 12945-2: 2020, ISO 12945-3: 2020, ISO 12945-3: 2020, ISO 12945-4: 2020, etc., the results of the above standard gaze rating also have Change. 1. The old standard requires the issuance of pilling levels, such as pilling Level 3; 2. The new version o...
Bursting strength is the most advanced method performed on fabrics to measure the strength of a material. It can be defined as the force required to break a woven/knitted fabric under standard conditions by a force applied perpendicular to the plane of the sample. Fabrics are often stressed in all directions during use, so it is necessary to apply actual stress to the material to determine the fab...