+8615280858852
+8615280858852
Digital Air Permeability Tester is used for the determination of the air permeability of a variety of fabrics, such as industrial fabrics, non-woven fabrics and other breathable materials. Features of Digital Air Permeability Tester Use high-precision pressure and differential pressure sensor detection to ensure accurate data. Micro-computer processing, test results are displayed directly, no need...
Hydrostatic pressure test is a common method to assess the water resistance of fabrics. GB / T 4744—2013 "Determination of Water Impermeability of Textile Fabrics" Hydrostatic Pressure Test "specifies a hydrostatic test method for testing the water impermeability of fabrics. Mainly suitable for tight fabrics, such as canvas, linoleum, tent cloth and rainproof clothing cloth, etc. The test method i...
AC05B AATCC Crockmeter is used to determine the colour fastness of textiles after dry or wet rubbing, suitable for coloured fabric, coated, printed and dyed textiles. Feature Of AATCC Crockmeter Improve to suitable different thickness of sample. Using the slide rail drive, smooth and effortless. LCD counters are more accurate and intuitive. AVENO Machine Recommend: AC05B AATCC Crockmet...
Bursting Strength Tester is used to determine the expansion force and divergence rate of fabric, woven, knitted fabrics, non-woven, paper and board. Standards Of Bursting Strength Tester ASTM3786-06, ISO2758/13938-1, BS 3424/3137, BS 4768, AS2001.2.4, GB/T 7742, IWSTM 29, EDA NA 80.4-02/80.3-99, NEXT 22 2206, FZ/T60019, JIS L 1018.6.17, BS-2922, FZ/T 60019, FZ/T 01030, JIS L 1018.6.17. AVENO ...
ELectronic Thickness Tester used to measure the thickness of all kinds of textiles, textile products, non-woven fabrics and other materials under different pressure, and can also be used to determine the thickness of other uniform thin material. Standards Of ELectronic Thickness Tester ISO 5084, ISO 9073, ISO 9863, FZ/T 01003 ASTM D1777, GB/T 3820, GB/T 24218.2 AVENO Machine Recom...
1. The sample is parked in the laboratory environment for more than 8 hours 2. Cut a sample at the flat part of the sample, if it is an insole, it should be cut to the transfer part 3. Remove the load and load shaft from the testing machine 4. Remove the top plate and test fixture 5. Device for the sample: Loosen the fixing ring on the test fixture, remove the sample tablet, place the sample in th...
online service
+8615280858852
sales@avenotester.com
+8615280858852
