+86 15280858852
Lex Meter, also named illuminometer, is a special instrument for measuring illumination. This model is portable and easy to operate, get result very fast.
model :
ATC01Brand:
AVENOorigin:
ChinaLead Time：
10-20daysport:
Xiamen portPayment:
T/T, L/Ccertificate:
CE ISO9001 ISO17025ATC01-Lux Tester
Application Of Lux Tester
Lex Meter, also named illuminometer, is a special instrument for measuring illumination. This model is portable and easy to operate, get result very fast.
Key Specification Of Lux Tester
|
Model |
ATC01 Lux Tester (illuminometer) |
|
Illuminance range |
0-200000Lux, 4 level |
|
Temperature range |
﹣9.5℃—49.9℃ |
|
Maximum storage data |
1000 |
|
Power supply |
3*1.5V, AAA battery |
|
Dimension |
57*37*195mm |
|
Weight |
1kg |
Toy Safety Sharp Edge Tester is used to evaluate whether accessible edges on toys or other products are likely to cause injury.
EN YO-yo Ball Tester is used for testing the elongation performance of yo - yo ball elastic rope toy.
ASTM YO-yo Ball Tester is used for testing the elongation performance of yo - yo ball elastic rope toy.
Needle Detector is widely used in toy, garment, textile, shoes, food industry and so on to detect broken needles or metallic impurities (iron wire) that left or mixed with raw materials or products.
Toy Safety Small Part Cylinder is used to simulating the throat of a child under 3 years of ag, assess whether toys are at risk of suffocation by children when their use and reasonable abuse.
Toy Safety Small Part Cylinder is used to Simulating the throat of a child under 3 years of ag, assess whether toys are at risk of suffocation by children when their use and reasonable abuse.
Digital Thickness Tester is widely used to test the thickness of different kinds of paper, leather, fabric, sheet metal, plastic and etc..
Accessibility Probe is a imitation of a child's finger for assessing whether touching the surface or accessories of the toy (points and faces of the toy) may pose a danger.
Snap Button Pull Tester it is special for pull test of toy and toy parts, determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester applies for compression and tensile testing of small samples (special attachments are available).
read more
AATCC Electronic Crockmeter is used to determine the colour fastness of textiles dry or wet rubbing, suitable for coloured fabric, coated, printed and dyed textiles.
read more
DIN Abrasion Tester is suitable to determine the wear resistance of elastic material, rubber, tires, conveyor belts, shoe soles, soft synthetic leather and other materials.
read more
Handle Torque Resistance Tester is suitable for evaluating the distortion resistance of kitchen handle after heating.
read more
Aging Oven is used to test the variation characteristics before and after heating of plastics, rubber, leather, cloth materials.
read more
Aug 18, 2019In life, most people choose to send valuable clothes to dry cleaning. They think that dry cleaning can not only wash away stains, but also keep the clothes beautiful. However, in actual life, the dry cleaning of the clothes may also cause discoloration or staining of light parts. Today, we will work together to understand the test methods for fastness to dry cleaning and the product standards for common clothing to assess the fastness to dry cleaning. What is dry cleaning? Dry cleaning refers to the washing of clothes with organic chemical solvents, including a dry and dry washing method that removes oil or stains. Color fastness to dry cleaning Common methods for testing the color fastness of dry cleaning in the laboratory are: GB/T 5711-2015 "Textile fastness test for color fastness to dry cleaning of tetrachloroethylene" ISO 105 D01:2010 "Textile—Tests for colour fastness-Part D01:Colour fastness to drycleaning using perchloroethylene solvent" Experiment procedure The above two standard test methods are the same, and the test steps are as follows: Step 1: Increase the water temperature of the water bath in the mechanical device to a test temperature of 30 °C. Step 2: preparing a combined sample, the sampling size is 40 mm × 100 mm. The test object can be a garment, a fabric, a yarn or a loose fiber. Step 3: Stitch two undyed square cotton twills along three sides to make a bag with an inner dimension of 100mm×100mm, and put a combined sample and 12 stainless steel wafers into the bag for any convenience. The form of the closed pocket. Step 4: Place the bag containing the combined sample and the stainless steel disc in a stainless steel container. Step 5: Add 200 mL of tetrachloroethylene to a stainless steel container (at a temperature of 30 ° C) in a fume hood. Step 6: Cover the stainless steel container, put it into the mechanical device, start the operation, and treat it in a water bath at 30 ° C for 30 min. Step 7: Take out the bag from the container, take out the sample, squeeze or centrifuge to remove excess solvent, and hang the sample in a ventilator for drying. Step 8: The original sample and the original lining fabric are used as reference samples, and the discoloration of the sample and the staining of the lining fabric are evaluated by a gray sample card or instrument. AVENO Machine Recommend: AC10 Water Colour Fastness Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
Jul 28, 2019Mouth-actuated Toys Endurance Tester is used to test the safety performance of mouth-actuated toys. The Mouth-actuated Toys Endurance Tester blows out and inhales a certain volume of gas of the toy at a certain speed for 10 times. After testing, determination if the toy and the parts spliting away off are small parts. Standards EN-71-1 section 8.17.2 ISO 8124-1 section 5.20 ASTM F963 section 8.13 GB 6675.2 section 5.20 AVENO Machine Recommend: AT26 Mouth Toy Endure Tester (Mouth-actuated Tester) Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
Jul 26, 2019Fabric Air Permeability Tester is used to determine the air permeability properties of fabric, suitable for many kinds of textile fabrics, including industrial fabrics, textile products such as non-wovens and other breathable materials. Feature Use high-precision pressure and differential pressure sensor detection to ensure accurate data. Microcomputer processing, direct display test results, no need to manual table checking and calculation. Built-in continuous test mode, the testing unit can be switched according to need. can be operated online with the computer host computer, automatically draw real-time test data curve, easy to observe. We have two model, AG18A and B, AG18A is manual change nozzle, AG18B can automatic change nozzle, you can choose what you prefer. AVENO Machine Recommend: AG18A Digital Air Permeability Tester AG18B Automatic Air Permeability Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
Jun 19, 2019Hydrostatic Head Pressure Tester is used to determine the water penetration resistance of all kinds of fabrics used for waterproofing, such as canvas, coating cloth, tent cloth, tarpaulin, rainproof clothing and geotextile materials, etc. According to the required experimental method, the parameters of the working mode such as pressurization, constant pressure timing, constant pressure timing, flexural experiment, water leakage and water leakage can be set. After each setting is completed, click to confirm and enter the working interface for experimental test. [P Rise]: Set the test sample, pressure unit, sample area, and pressurization rate. [Const P & Timing]: Set the test sample, pressure unit, sample area, pressurization rate, and end point pressure. [Const P & Time]: Set the pressure unit, sample area, pressurization rate, end point pressure, and constant pressure time. [Water Penetration]: Set the pressure unit, sample area, end point pressure, and pressure rate. [Fatigue]: Set the pressure unit, sample area, end point pressure, pressurization rate, constant pressure time, and experimental period. AVENO Machine Recommend: AG17B Hydrostatic Head Pressure Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
Jun 17, 20191 Sample Preparation Sample and standard friction white cloth should be in such environment of constant temperature and humidity to humidify. When the sample has many kinds of colors, should make all colors rubbed. If the size of a variety of colors is large enough , should be sampled Respectively. Cutting sample, do dry friction and wet friction respectively, should be ensured to rub to all colors. If the positive and negative of specimen is made up of different material , colors. So the both positive and negative need to do friction colo fastness test. Doing dry and wet fastness of friction should not be repeated in the same part in the specimen. 2 Dry Friction Flatly put sample on the friction apparatus placing sandpaper, make the length of the specimen is in line with the direction of the moning track of the equipment, and fix sample on the pressuring plate, the folder should be flat. Standard friction small white cloth fix on the friction head, clamp it tightly with spring clamp, lightly place friction head on the specimen. Ensure the specimen without sliding or wrinking when rubs Place friction head on the specimen, connect to he power, open the POWER button, set the times of testing. Press START button to begin the test, when the tests reaches the setting value, the instrument automatically stops. Remove the standard white cotton cloth , going to rate contrasting to color cards. 3 Wet Friction Completely soak standard friction small white cloth in distilled water. After removing, clamp in the filter paper to extrude in order to have a certain degree of water content. The remaining steps is same as the dry friction test. AVENO Machine Recommend: AC04 AATCC Electronic Crockmeter Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
Jun 12, 2019Scorch & Sublimation Tester used to test the ability to resist changes or shifts in color of textile under heating condition. Simulate the dyeing sublimation grade of fabric when ironing and under high temperature and humidity in daily life. AVENO new design Scorch & Sublimation Tester (Model: AC09) have 1, 2 and 3 test position for customer choose, meet ISO 105. BS 1006, AATCC 92, 114, 117, 133 DIN 54022/54060, GB/T 5718, GB/T 6152. With Beautiful look and safety and convenient design concept. AVENO Machine Recommend: AC09 Scorch & Sublimation Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
online service
+86 15280858852
sales@avenotester.com
sales@avenotester.com
+86 15280858852
