Laboratory Wringer suitable for testing the liquid content of small cloth samples in the textile printing and dyeing and finishing process in the laboratory.
1. Operation steps of Laboratory Padder:
1) Items to be confirmed before operation:
-
Confirm whether the power supply meets the requirements.
-
Whether the water collecting tray is installed and whether the internal residual liquid is poured out.
-
Whether the Lab Wringer (Padder) is stable.
2. Plug in the power plug and connect the power supply.
3. Install a weight of appropriate weight on the weight base.
4. Press the start button to start the Lab Wringer (Padder), and the drum starts to rotate.
5. Place one end of the sample flat at the joint of the two rollers.
6. The roller drives the sample to rotate backward, and at the same time, it removes excess water.
7. After the end of the sample is removed from the rear of the drum, grasp the end of the sample and move with the sample.
8. Take the sample after the sample comes out completely from the rear.
9. Press the stop button to turn off the power and remove the water collected in the water collecting pan.
AVENO Machine Recommend:
AC31 Laboratory Wringer
Contact Us Now!
Sales Dept Tel: +86 15280858852
Email: sales@avenotester.com
Skype: sales@avenotester.com
Web: www.avenotester.com