Fiber Content Analyzer AR05
Fiber Content Analyzer is mainly used for measuring various fiber diameters, cross-section analysis, and content of textile ingredients.
+8615280858852
Programmable Ultra High Resistance Tester is used to test the high resistance of different kinds of material.
model :
AT19Brand:
AVENOorigin:
ChinaLead Time:
5daysport:
Xiamen portPayment:
T/T, L/Ccertificate:
CE, ISO9001, ISO17025standard:
EN-71-1, ISO 8124-1, GB6675-2, ASTM F963, and etc.AT19-Programmable Ultra High Resistance Tester
Application of Programmable Ultra High Resistance Tester
Programmable Ultra High Resistance Tester is used to test the high resistance of different kinds of material. It is an intelligent measurement instrument that is used for rapid measurements on insulating properties of electronic parts and components (especially the capacitance), dielectric material, equipments, wires, cables, etc.
Key Specification of Programmable Ultra High Resistance Tester
Model |
AT19 Programmable Ultra High Resistance Tester |
Test voltage range: |
10-1000V |
Insulation resistance test range: |
100KΩ-10TΩ Accuracy: When V≥10V and I>10nA, ±2% When V<10V and I ≤ 10nA, ±5% |
Current test range: |
1: 100uA-1mA ,Input internal resistance 10kΩ 2: 10uA-100uA,Input internal resistance 10kΩ 3: 1uA-10uA,Input internal resistance 10kΩ 4: 100nA-1uA,Input internal resistance 10kΩ 5: 10nA-100nA,Input internal resistance 1MΩ 6: 1nA-10nA,Input internal resistance 1MΩ |
Voltage test range: |
1V~1000V Accuracy When V≥10V, 1%±1V When V<10V , 10%±0.1V |
Current Limit |
10mA |
Charging time |
0~999s, programmablelogic |
Measurement delay |
0~999s, programmablelogic |
Testing Speed |
High speed: single measurement time≤30 ms Low speed: single measurement time≤60 ms |
Standard interface |
RS232C, USB HOST, USB DEVICE, HANDLER |
Power supply |
90~121V AC(60Hz)or 198~242V AC(50Hz) |
Dimension |
235(W)×105(H)×360(D) |
Pacifier Tester is used to test the risk of choking or suffocation caused by pacifier toys to children.
read moreLinear abrasion tester is used to evaluate the wear resistance, scratch resistance (single or multiple scratches), and color transfer (usually friction camel or abrasion fastness) of products, etc. Both dry abrasion test and wet abrasion test can be conducted.
read moreThe Lab Twister with counter is used for making small samples. The dyed loose fibers are twisted into yarn by this machine, which can be combined or used to weave sheets to judge the dyeing effect and other indicators. This model has a counter to complete the counting.
read moreYarn Abrasion Tester is mainly suitable for the determination of wear resistance of textile materials such as single yarn and ply yarn.
read moreThis Fiber Specific Resistance Meter can measure the specific resistance of various chemical fibers and is one of the important instruments for measuring the spinnability of chemical fibers. Based on the pointer-type fiber specific resistance meter, it adopts high-resistance operational amplifier and digital display technology to make the test data more accurate, stable, and rapid, and the operation is easier. It is suitable for measuring the specific resistance of chemical fibers in scientific research, fiber inspection, production and use of chemical fibers, etc.
read more