+8615280858852
Open Martindale Abrasion and Pilling Tester’s power switch, the screen will show following: Press the test to enter the work interface, the screen will show following: (1) When the Martindale Abrasion Tester is not in working state, Click “Times” button to set test times. The setting range is 0~999999 times. (2) When the Martindale Abrasion Tester is not in working state, Click “Speed” button to s...
Please add the lube to the belt pulley axletree and rotating member to make it working well. Please clean the Fabric Pilling Tester face everyday after your test, and you should spray the rust preventing oil regularly. Please check the tightness of the Random Pilling Tester’s belt regularly, and adjust or change the new belt of same standard depending on the circumstance. AVENO Machine R...
1.Installed abrasive paper (before installation, please put gloves, the fingers were not galled by sand) Get abrasive paper that length is 473 +-1mm and width is 400 mm at least. But those two items do not exceed roller, the average thickness is about 1.0 0.2 mm. Get three bars double-face tape that is equal to roller, the thickness is 0.2mm at most, the width is 50mm, add them on roller well-di...
Bally Leather Flexing Resistance Tester is designed for determining the flexing resistance of materials such as leather, fabric and other materials. By checking the damage degree flexing a certain time, to determine its flexibility. We have 12 and 24 test position for your choose, also you can custom made the position quantity you like. Meet Standards: SATRA TM55, ISO5402-1, ISO 17694, EN 13512, E...
1. Always keep the Taber Abrasion Tester clean and tidy by wiping the Taber Abrasion Resistance Tester with cotton cloth. 2. The metallic surface shall be applied with anti-rust oil. 3. Fill lubricating oil for the moving parts at regular intervals. AVENO Machine Recommend: AF46 Taber Abrasion Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skyp...
Safety Glove Cutting Tester also named Blade Cut Resistance Tester, is used to check the protective capability for the protective zone of the safety glove against cutting. Test principle of Blade Cut Resistance Tester Put the sample on the special test set, cutting the sample with a rotating circular blade, the blade reciprocate under a certain load and times, automatic counting and stop after tes...