+8615280858852
Install of Fryma Fabric Extensiometer 1. Place the Frymer extension meter on a platform at least 1.5m above the ground. 2. One end of the pulley should be placed on the edge of the platform to facilitate the hanging of weights. Operation steps of Frymer Extension and Recovery Meter 1. Install the processed sample on the sample holder. The sample should be as flat as possible to avoid wri...
Install of Fryma Fabric Extensiometer 1. Place the Frymer extension meter on a platform at least 1.5m above the ground. 2. One end of the pulley should be placed on the edge of the platform to facilitate the hanging of weights. Operation steps of Frymer Extension and Recovery Meter 1. Install the processed sample on the sample holder. The sample should be as flat as possible to avoid wrinkles. 2. ...
1 The Martindale Test Machine For Fabric case must be grounded and its grounding resistance should be less than or equal to 1Ω. 2 Do not bump the parts during handling, installation, adjustment and use to avoid mechanical damage and affect the test results. 3 The touch buttons in the Martindale Abrasion Test Equipment control panel can only be pressed with your fingers. Do not use other hard objec...
The introduction of the pilling resistance fuzzing and pilling mechanism of fabric and the test method to evaluate the anti fuzzing and pilling performance of fabric will help manufacturers to consider the source, select appropriate raw materials and manufacturing process, comprehensively consider all aspects of fabric indicators, and achieve the best combination of design, performance, quality an...
Notice! There are new changes in the fuzzing and pilling rating regulations! Come see your fabric felt? With GB / T 4802.4-2020, ISO 12945-1: 2020, ISO 12945-2: 2020, ISO 12945-3: 2020, ISO 12945-3: 2020, ISO 12945-4: 2020, etc., the results of the above standard gaze rating also have Change. 1. The old standard requires the issuance of pilling levels, such as pilling Level 3; 2. The new version o...
Martindale Abrasion Tester is suitable for abrasion resistance test and apparent pilling performance test of woven fabrics, knitted fabrics, non-woven fabrics, decorative materials and coated fabrics. Martindale Abrasion Tester Test Principle: The fabric to be tested is installed in the upper sample holder and rubbed against the abrasive installed on the grinding table, and the friction trajectory...