+8615280858852
In a standard laboratory, spray distilled water on the sample through a funnel, and compare the rating with a waterproof standard sample. Common test standards are American Standard: AATCC 22; European Standard: ISO 4920. There are three types of anti-splashing water: ordinary waterproof (WaterRepellent, abbreviated as: W/R), waterproof water (DurableWaterRepellent outdoor fabric industry is commo...
1. Sensor pressure value is not jumping or the value is too large Check if the motherboard sensor is loose. If it is loose, please insert it firmly. If the instrument is not turned on, please click the clear button on the working interface. 2. There was no significant increase in pressure during the experiment: Make sure the sensor is cleared before the experiment starts. Check if the motherboard ...
1. Application Bursting Strength Tester is used to determine the expansion force and divergence rate of fabric, woven, knitted fabrics, non-woven, paper and board. 2. Main feature 2.1. The hydraulic method is adopted to comply with the new national standard. 2.2. Touch screen control, the interface is simple and easy to understand, the operation is simple and intuitive, and the touch is sensitive....
1 The degree of expansion remains unchanged during the test: ▲Restart the instrument. ▲Check whether the test parameters are set correctly. 2 The experimental data results vary greatly. ▲Check the state of the instrument. The elastic diaphragm must be replaced when it is obviously deformed. AVENO Machine Recommend: AG10 Bursting Strength Tester Contact Us Now! Sales Dept Tel: +86 15280...
Sample Prepare Laboratory Sample - As a laboratory sample, randomly select a quantity of buttons, approximately 100 to 200, from a carton and from contained boxes, that adequately represents the material, from which test specimens may be selected. Test Specimens - Randomly select 15 buttons from the laboratory sample for testing. If test specimens are submitted for preproduction approval, testing ...
1 Precautions Of ELectronic Thickness Tester ELectronic Thickness Tester shall be installed on a stable working table with no obvious vibration and corrosive medium. The instrument shall be free from abnormal noise and vibration during operation. The electric device such as push button and toggle switch shall be sensitive, safe and reliable; the whole machine is well grounded. 2 Maintenance Of ELe...