+8615280858852
+8615280858852
Ozone Test Chamber description The content of ozone in the atmosphere is very small, but it is the main factor of rubber cracking. This Ozone Test Chamber simulates and strengthens the ozone condition in the atmosphere, studies the action of ozone on rubber, and quickly identifies and evaluates the anti-ozone aging performance of rubber and the protection of anti-ozonant. Method of performance. Re...
We recommend that you do not perform the following operations on the ROLLER ROTATION DIRECTION to ensure safety. More about Electronic Laboratory Padder please click: https://www.avenotester.com/electronic-laboratory-padder-ac24_p239.html Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
Manual Laboratory Padder is used to test the liquid content of fabric when textile printing and dyeing, finishing process, and holding uniform rolling surplus rate to make water content stable. Also can used to pull out moisture of the soaked textile, it is a very convenient, simple and effective laboratory test tool. Do you want to know more about the Laboratory Dyeing Padder? Control mode: Manua...
Light Fastness Tester (water-cool) is a testing machine developed by our company according to the requirements of national standards and AATCC standards. The machine adopts the latest sensor technology and microcomputer control technology, and has the advantages of high measurement and control accuracy, high intelligence, stable and reliable performance; simple and clear interface, easy operation,...
Laboratory HT Stenter is used in dyeing and finishing laboratory to test steam culture, baking, setting drying and so on, so as to get the correct test of discoloration of dyeing and finishing process, and can also be used to make the and obtain the correct color sample and tissue sample. Installation guide: 1. Laboratory Steamer should be placed away from the wall distance of about 250 for coolin...
1. Prepare the sample: Samples ready for testing 2. Operation steps: 1) Before testing, check whether the power supply of the Light Aging Tester is plugged in properly. 2) Adjust the height of the mesh, put the sample on it (some customers will ask to wrap half of the sample with aluminum paper) set the test time, turn on the power switch Note: 1) Only one of them is turned on when 15W is needed, ...
online service
+8615280858852
sales@avenotester.com
+8615280858852
