Battery Comprehensive Short Circuit Tester AJ07
Battery Comprehensive Short Circuit Tester is to simulate the forced internal short circuit test of the battery at a certain ambient temperature.
+8615280858852
Salt Spray Tester is used to do accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish.
model :
AE02Brand:
AVENOorigin:
ChinaLead Time:
7days, in stockport:
Xiamen portPayment:
T/T, L/Ccertificate:
CE, ISO9001, ISO17025standard:
ISO, EN, ASTM, AATCC, M&S, JIS, and etc.
AE02-Salt Spray Tester
Application Of Salt
Spray Tester
Salt Spray Tester is used to do accelerated
corrosion test that produces a corrosive attack to the coated samples in order
to predict its suitability in use as a protective finish.
Standards Of Salt Spray Tester
CNS3627,3885,4159,7669,8886,JIS D-0201,H-8502,H-8610,K-5400, Z-2371,ISO 3768,3769,3770,ASTM B-117,B-268,GB-T2423,GJB 150.
Key Specification Of Salt Spray Tester
Test chamber capacity (L) |
108L |
270L |
480L |
Test chamber dimension L×W×D(cm) |
60×45×40 |
90×60×50 |
120×80×50 |
Outside dimension L×W×D(cm) |
110×66×105 |
138×88×110 |
190×130×140 |
Brine tank |
15L |
25L |
25L |
Temperature of test chamber |
NSS.ACSS 35℃±1℃/CASS 50℃±1℃ |
||
Temperature of pressure barrel |
NSS ACSS 47℃±1℃/ CASS 63℃±1℃ |
||
Compressed Air Pressure |
1.00±0.01kgf/cm2 |
||
Spray quantity |
1.0-2.0ml/80cm2.h |
||
Test chamber relative humidity |
Above 85% |
||
PH |
6.5~7.2, 3.0~3.2 |
||
Spray method |
Continuous and intermittent method |
||
Temperature range |
1.Test chamber: 35℃, pressure barrel 50℃ can be set 2.Test chamber: 47℃, pressure barrel 63℃ can be set Temperature accuracy: ±1℃ |
Standard Accessories |
Counting cup |
1pc |
English manual |
1pc |
Pneumatic Bursting Strength Tester is used to determine the expansion force and divergence rate of fabric, woven, knitted fabrics, non-woven, paper and board.
read moreElectronic Laboratory Padder made of stainless steel, easy to move, especially suitable for small laboratory tests. It is mainly used for the liquid content test of small cloth samples in the process of textile printing and dyeing and after finishing, and maintain a certain uniform rolling residual rate, so that the water content is stable, and all kinds of textiles can also be soaked in water and put on the instrument to squeeze water to cooperate with the test. It is a very convenient, simple and effective test tool for the laboratory.
read moreLiquid Leak Test Needle is used to test leakage of liquid stuffed toys.
read moreThe yarn hairiness tester is used to measure and analyze the hairiness index of yarn, and automatically test and statistically analyze the length, quantity, and distribution of hairiness. Can test different kinds of yarn including short fiber yarns made from cotton, wool, linen, silk, synthetic fibers, and their blends.
read moreASTM D3985 Oxygen Gas Transmission Rate Tester suitable for measuring the oxygen permeability performance of high barrier materials such as plastic film, aluminum foil plastic film, waterproof material, metal foil, etc.
read more