Snap Button Pull Tester AG03
Snap Button Pull Tester used to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys.
+8615280858852
Snap Button Pull Tester it is special for pull test of toy and toy parts, determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester applies for compression and tensile testing of small samples (special attachments are available).
model :
AG03BBrand:
AVENOorigin:
ChinaLead Time:
10-20daysport:
Xiamen portPayment:
T/T, L/Ccertificate:
CE ISO9001 ISO17025standard:
ASTM PS79-96, ASTM F963, D4846, EN 71-1, 16 CFR 1500.51-53, M&S P115A.AG03B- Snap Button Pull Tester (Special for Toy Parts)
Application Of Snap Button Pull Tester (Special for Toy Parts)
Snap Button Pull Tester it is special for pull test of toy and toy parts, determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester applies for compression and tensile testing of small samples (special attachments are available).
Standards Of Snap Button Pull Tester (Special for Toy Parts)
ASTM PS79-96, ASTM F963, D4846, EN 71-1, 16 CFR 1500.51-53, M&S P115A.
Key Specification Of Snap Button Pull Tester (Special for Toy Parts)
Model |
AG03B- Snap Button Pull Tester (Special for Toy Parts) |
Effective stroke |
370mm |
Capacity |
500N |
Dimensions |
310x 280 x 810 mm |
Weight |
40kg |
Accessories Of Snap Button Pull Tester (Special for Toy Parts)
Standard Accessories |
IMADA Force Gauge FB-30K (300N, Resolution 2N, Accuracy +/-1%FS) |
1 pc |
ATB04 Universal Upper Grip |
1 pc |
|
ATB07 Upper Stud Clamp |
1 pc |
|
ATB06 Long Nose Vise Grip |
1 pc |
|
ATB33 Seam Clamp |
1 pc |
|
ATB12 Three Pronged Clamp |
1 pc |
|
Lowe Grasp Button Accessory Kit |
1 pc |
|
Lowe Fabric Clamp & Level Arm Locking |
1 pc |
|
Calibration Weight 15LB |
1 pc |
|
Spanner #8 and #14 |
1 set |
|
Rubber band (Universal upper grip vulnerable parts) |
10pcs |
|
Option Accessories |
Multifunction vise clamp |
|
ATB41 Hair Clamp |
|
|
ATB32 Short-Mouth Clamp |
|
|
Goggles |
|
Pneumatic Bursting Strength Tester is used to determine the expansion force and divergence rate of fabric, woven, knitted fabrics, non-woven, paper and board.
read moreElectronic Laboratory Padder made of stainless steel, easy to move, especially suitable for small laboratory tests. It is mainly used for the liquid content test of small cloth samples in the process of textile printing and dyeing and after finishing, and maintain a certain uniform rolling residual rate, so that the water content is stable, and all kinds of textiles can also be soaked in water and put on the instrument to squeeze water to cooperate with the test. It is a very convenient, simple and effective test tool for the laboratory.
read moreLiquid Leak Test Needle is used to test leakage of liquid stuffed toys.
read moreThe yarn hairiness tester is used to measure and analyze the hairiness index of yarn, and automatically test and statistically analyze the length, quantity, and distribution of hairiness. Can test different kinds of yarn including short fiber yarns made from cotton, wool, linen, silk, synthetic fibers, and their blends.
read moreASTM D3985 Oxygen Gas Transmission Rate Tester suitable for measuring the oxygen permeability performance of high barrier materials such as plastic film, aluminum foil plastic film, waterproof material, metal foil, etc.
read more