Bursting Strength Tester AG10
Bursting Strength Tester is used to determine the expansion force and divergence rate of fabric, woven, knitted fabrics, non-woven, paper and board.
+8615280858852
Snap Button Pull Tester used to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys.
model :
AG03Brand:
AVENOorigin:
ChinaLead Time:
3days (in stock)port:
Xiamen portPayment:
T/T, L/Ccertificate:
CE, ISO9001, ISO17025standard:
ASTM PS79-96, ASTM F963, D4846, EN 71-1, 16 CFR 1500.51-53, M&S P115A.AG03- Snap Button Pull Tester
Application of Snap Button Pull Tester
Snap Button Pull Tester used to measurement of the uniform force applied to the snap attachment shall be recorded by means of a force-measuring device, to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester applies for compression and tensile testing of small samples(special attachments are available).
Standards of Snap Button Pull Tester
ASTM PS79-96, ASTM F963, D4846, EN 71-1, 16 CFR 1500.51-53, M&S P115A.
Key Specification of Snap Button Pull Tester
Stroke |
400mm |
Capacity |
500N |
Dimensions |
310x 280 x 810 mm |
Weight |
40kg |
Accessories of Snap Button Pull Tester
Standard Accessories |
IMADA Force Gauge FB-30K (300N, Resolution 2N, Accuracy +/-1%FS) |
1 pc |
Universal upper grip |
1 pc |
|
Upper Stud Clamp |
1 pc |
|
Long Nose Vise Grip |
1 pc |
|
Upper Button Clamp |
1 pc |
|
Lowe Grasp Button Accessory Kit |
1 pc |
|
Lowe Fabric Clamp & Level Arm Locking |
1 pc |
|
Standard Accessories |
Calibration Weight 15LB |
1 pc |
Spanner #8 and #14 |
1 set |
|
Rubber band (Universal upper grip vulnerable parts) |
10pc |
Related products
Universal Tensile Strength Tester Button Impact Resistance Tester Universal Tensile Strength
(Single Column) Tester (Double Column)
https://www.avenotester.com/universal-tensile-strength-tester-single-column-ag02_p11.html
https://www.avenotester.com/button-impact-resistance-tester-ag12_p22.html
https://www.avenotester.com/Universal-Tensile-Strength-Tester-Double-Column-AG01_p12.html
Zipper Fatigue Tester is used to determine the life of metal or plastic zipper under condition of specified load and specified times of stretching cycle, test for zipper in a tension action of lateral and longitudinal, it could be tested its bearing ability in reciprocating motion for a regulation time.
read moreWeight Gantry Crane is used to assist in fixing the sample in the toy safety performance test, and can also be used to raise samples and test weights.
read moreDigital Internal Length Measurement is suitable for measuring the inner length of adult/child shoes.
read moreFlammability Testing Nailed Fixture is mainly used for testing the combustion performance of cloth toys and filling materials.
read more