Snap Button Pull Tester AG03
Snap Button Pull Tester used to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys.
+8615280858852
UV Accelerated Weathering Tester can simulates the damage caused by ultraviolet light, Rain Water and dew, test sample through exposing the sample to the alternating cycle of light and water under controlled high temperature.
model :
AG19Brand:
AVENOorigin:
ChinaLead Time:
10-20daysport:
Xiamen portPayment:
T/T, L/Ccertificate:
CE, ISO9001, ISO17025standard:
ISO, EN, ASTM, AATCC, M&S, JIS, and etc.
AG19-UV Accelerated Weathering Tester
Application Of UV Accelerated Weathering Tester
UV Accelerated Weathering Tester can simulates the damage caused by ultraviolet light, Rain Water and dew, test sample through exposing the sample to the alternating cycle of light and water under controlled high temperature. It uses ultraviolet light tubes to simulate the radiation of sunlight, use condense water and water spray to simulated dew and Rain Water.
Widely used to selection of new materials, improvement of existing materials, and evaluation of changes in material formulations.
Key Specification Of UV Accelerated Weathering Tester
|
Model |
AG19 UV Accelerated Weathering Tester |
|
Control model |
Touch screen control |
|
Test chamber dimension |
60×50×750cm |
|
Temperature range |
RT+10~70°C |
|
Humidity range |
≥90%RH |
|
Temperature uniformity |
±1°C |
|
Temperature fluctuation |
±0.5°C |
|
Temperature control |
PID SSR control |
|
Distance from sample to lamp |
50±2mm(adjustable) |
|
Centre distance between the lamp |
70mm |
|
Irradiance |
1.0W/cm2 (adjustable) |
|
Effective irradiation areas |
45×117×50cm |
|
Testing time |
0~999H, adjustable |
|
Lamp |
40W/pc, 8pc(UVA/UVB, life time above 1600h) |
|
Ultraviolet wavelength |
UVA340: 315-400nm UVB313: 280-315nm |
|
Standard specimen size |
75×285㎜ |
|
Blackboard temperature |
40℃~65℃ |
|
Power Supply |
AC280V, 50/60HZ |
|
Dimension |
58×128×135cm |
|
Weight |
150KG |
Accessories Of UV Accelerated Weathering Tester
|
Standard Accessories |
Sample fixture |
1set |
|
UVA Lamp |
1set |
|
|
English manual operate video |
1set |
|
|
Operate video |
1pc |
|
|
Quality certification |
1pc |
Glove Impact Testing Equipment used to test the impact resistance of gloves, motorcycle protective clothing, knee pads, etc. During the experiment, lift the impact hammer to the height of the required impact energy, release the impact hammer, and drop it along a vertical guide path onto the sample placed on the test anvil. The center axis of the falling hammer coincides with the center axis of the anvil. Record the peak force of the impact test and check whether the sample is torn or perforated.
read moreSeat Belt Friction Tester is used to simulate the pilling changes of clothing caused by seat belt friction.
read moreAccording to the bending force of the sample, according to the standard spacing and load weight requirements, perform reciprocating bending resistance under the specified testing speed conditions, observe whether there are cracks, coating peeling, adhesive delamination and other abnormal quality conditions on the surface, suitable for belt, shoulder strap, luggage soft lift and other belt products
read moreDouble row LCD display, front and rear two display screen. Rechargeable battery. Weighing, peeling, counting, unit conversion. RS232 data interface, linking computers and printers.
read moreAlcohol Rubber Abrasion Tester used for glass cover plates, films, plastics, automotive parts, rubber, leather and textiles, electroplating, freely detachable components, paints, printed patterns and other products.
read more
online service
+8615280858852
sales@avenotester.com
+8615280858852