Pneumatic Bursting Strength Tester AG10C
Pneumatic Bursting Strength Tester is used to determine the expansion force and divergence rate of fabric, woven, knitted fabrics, non-woven, paper and board.
read more+8615280858852
1.Installation space requirements 2. Installation condition 2.1Working environment requirements 2.1.1 The best operating environment for the Fabric Pilling Tester is the ambient temperature and humidity between 10℃~30℃ and 70%RH. 2.1.2 There is no vibration in the surrounding environment, no corrosive, flammable, explosive medium, no strong electromagnetic interference, and a well-ventilated place. 3. Equipment acceptance During transportation, the Random Pilling Tester is best placed in a vertical manner, please don’t lie down. After unpacking the instrument, check the Random Tumble Pilling Testing machine and accessories according to the packing list. If there is any damage or missing, please notify the company in time so that we can deal with it in time. *Note: Please keep the random information and accessories properly. 4. Instrument installation 4.1 Instrument placement Place the instrument on a stable test bench. After placing it, adjust the feet to place the instrument horizontally and ensure that the four feet are evenly stressed. 4.2 Air source installation Connect the air source at the air source interface of the pressure regulating valve as shown in the figure, and adjust the pressure regulating valve to make the air pressure 0.3MPa. AVENO Machine Recommend: AG15 Random Tumble Pilling Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
read moreShoes lining seepage tester used to test the waterproof function of rubber-faced, rubber shoes and shoes lining. The fixtures are made of SUS stainless steel, which will not rust during long-term contact with water. Two-station current test, dual foot switches control left and right clamps, convenient operation, high work efficiency and accurate test. Operating specifications Of Shoe Lining Leakproof Testing machine Description of control panel: 1. Left pressure adjustment: used to adjust the air pressure required by the left clamp group. 2. Left air valve: It is used to open and close the left clamp if it needs to be inflated. If only the right clamp is used, close the left air valve. 3. Power source: The main power switch is used to control the operation of the entire machine. 4. Left clamp work: used to control the clamping or releasing action of the left clamp, press to clamp, press up to release. 5. Left air pressure: display the current inflation pressure status of the left fixture group. 6. Immersion time: used to set the test time of the sample. 7. Right air pressure: display the current air pressure status of the right fixture group. 8. Right air valve: It is used to open and close the right clamp if it needs to be inflated. If only the left clamp is used, close the right air valve. 9. Right pressure adjustment: used to adjust the air pressure required by the right clamp group 10. Right gripper work: used to control the clamping or loosening action of the right gripper. Press the sock once to be clamped, and press the gripper again to loosen it. 11. Lowering work: used to control whether the left and right clamps are lowered into the water. 12. There is a general voltage regulating line on the back of the unit, and make necessary adjustments when needed. Operation steps: A: Turn on the power. 1. Before use, carefully check whether the various parts of the machine are normal, and confirm that the oil is injected on the surfaces of the upper and lower pillars on both sides to make it lubricated normally (oil injection time 1 time/day) and prepare to start; 2. Connect the air source, open the "air pressure valve" and use the "left and right pressure regulator" to adjust the required air pressure and adjust the "water immersion timing"; 3. Press the "power" switch, and the "power light" and "landing light" are on at this time. After the set time is reached, the main cylinder immediately drives the support rods on both sides to brake and rise to the limit; 4. Place the test piece in the middle of the clamp, turn on the working switches of the left and right clamps, and clamp and seal the test piece; 5. Rotate the left and right air pressure valves to the right, the sock will be inflated to the set pressure; 6. Press the "descent work" button once, and the fixture will bring the test piece into the water of a fixed depth for testing. When it is immersed for the specified time, the two fixtures will automatically take the test piece out of the ...
read moreThe color of the laboratory is different. Is there any difference between the morning sunlight and the afternoon sunlight? For printing and dyeing factories, choosing the source of light is a very important thing! Standard light source operating parameters The standard light source color-matched light box is usually a combination of multiple light sources. It helps users provide simulated sunlight D65, D50, simulated shop showroom lighting TL84, CWF, U30, and home lighting F, INCA, horizontal sunlight HORIZON, For ultraviolet lamps, UV, etc., the corresponding parameters of each light source are not the same. Light source name Color temperature(K) Tone RGB Explanation A 2856 Incandescent lamp/tungsten B 4874 Direct sunlight at noon C 6774 Average/North Sky Daylight D50 5003 Light on the horizon D55 5503 Morning/afternoon daylight D65 6504 Noon Sun: TV, sRGB color space D75 7504 North sky daylight E 5454 Equal energy F1 6430 Daylight Fluorescence F2 4230 Cool white fluorescence F3 3450 White fluorescence F4 2940 Warm white fluorescence F5 6350 Daylight Fluorescence F6 4150 Lite white fluorescent F7 6500 D65 simulator, daylight simulator F8 5000 D50 Simulator, Forest City F40 Design 50 F9 4150 Cool white luxury fluorescence F10 5000 Philips TL85,Ultralume 50 F11 4000 Philips TL84,Ultralume 40 F12 3000 Philips TL83,Ultralume 30 A light source: The color temperature is 2845K, which is equivalent to the light radiated by the incandescent lamp at 2800K. Light source B: The correlated color temperature is 4800K, which is equivalent to direct sunlight at noon. C light source: The correlated color temperature is 6700K, which is equivalent to the natural light during the day, and it has more blue components. D65 light source: The correlated color temperature is 6500K, which is equivalent to the average daylight. In recent years, it is often used as a standard light source for color TVs. E light source: also known as isoenergetic white light, that is, P(l)=constant. It is a hypothetical light source that does not actually exist. It is used purely to simplify calculations in chromatics, and its correlated color temperature is 5500K. F series illuminants represent various types of fluorescent lighting. Different color temperature, different light color Color temperature Light color Feel <3000K Warm (reddish white) Steady and warm 3000-5000K Middle (white) Readily >5000K Cool type (white with blue) Cold The color is usually observed in daylight, so the fine color discrimination in industrial production requires that the lighting source must have a spectral power distribution that approximates real daylight, that is, the D65 standard light source specified by CIE, and the D65 standard light source light box is also a large market demand. A color light box. AVENO Machine Recommend: AC07 Color Matching Cabinets Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotes...
read moreWhy should we evaluate the rubbing color fastness of the fabric? When people wear clothing, the fabric and the lining will produce friction; various spliced parts will also produce friction; when relying on objects, it will also produce friction; these frictions are likely to be due to the color fastness of the friction of the fabric. The color shift will affect the appearance of the clothing. Therefore, the rubbing color fastness test is listed in GB 18401 "National Textile Basic Safety Technical Specifications" as a basic technical requirement is reasonable. Now that the color fastness to rubbing is so important, as a professional testing agency or professional testing personnel; we should have a deeper understanding of the color fastness to rubbing test to make our test results close to the true values of the samples. Common standards for rubbing color fastness test: Chinese standard: GB/T 3920 International Standard: ISO 105 X12/X16 American standard: AATCC 8/AATCC 116 Japanese Standard: JIS L0849 Type I /Type II Other national standards are not often used, and standard numbers are not listed here, just to popularize the national standard prefixes. EN EU BS United Kingdom CAN/CGSB Canada AS Australia DIN Germany NF France Commonly used equipment for rubbing color fastness test: AC04 AATCC Electronic Crockmeter AC04-2-AATCC Electronic Crockmeter AC04-3 AATCC Electronic Crockmeter AC05 AATCC Crockmeter(Rubbing Fastness Tester) AC05B AATCC Crockmeter Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
read moreMouth-actuated Toys Endurance Tester is used to test the safety performance of mouth-actuated toys. The Mouth-actuated Toys Endurance Tester blows out and inhales a certain volume of gas of the toy at a certain speed for 10 times. After testing, determination if the toy and the parts spliting away off are small parts. Standards EN-71-1 section 8.17.2 ISO 8124-1 section 5.20 ASTM F963 section 8.13 GB 6675.2 section 5.20 AVENO Machine Recommend: AT26 Mouth Toy Endure Tester (Mouth-actuated Tester) Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
read moreFabric Air Permeability Tester is used to determine the air permeability properties of fabric, suitable for many kinds of textile fabrics, including industrial fabrics, textile products such as non-wovens and other breathable materials. Feature Use high-precision pressure and differential pressure sensor detection to ensure accurate data. Microcomputer processing, direct display test results, no need to manual table checking and calculation. Built-in continuous test mode, the testing unit can be switched according to need. can be operated online with the computer host computer, automatically draw real-time test data curve, easy to observe. We have two model, AG18A and B, AG18A is manual change nozzle, AG18B can automatic change nozzle, you can choose what you prefer. AVENO Machine Recommend: AG18A Digital Air Permeability Tester AG18B Automatic Air Permeability Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
read moreHydrostatic Head Pressure Tester is used to determine the water penetration resistance of all kinds of fabrics used for waterproofing, such as canvas, coating cloth, tent cloth, tarpaulin, rainproof clothing and geotextile materials, etc. According to the required experimental method, the parameters of the working mode such as pressurization, constant pressure timing, constant pressure timing, flexural experiment, water leakage and water leakage can be set. After each setting is completed, click to confirm and enter the working interface for experimental test. [P Rise]: Set the test sample, pressure unit, sample area, and pressurization rate. [Const P & Timing]: Set the test sample, pressure unit, sample area, pressurization rate, and end point pressure. [Const P & Time]: Set the pressure unit, sample area, pressurization rate, end point pressure, and constant pressure time. [Water Penetration]: Set the pressure unit, sample area, end point pressure, and pressure rate. [Fatigue]: Set the pressure unit, sample area, end point pressure, pressurization rate, constant pressure time, and experimental period. AVENO Machine Recommend: AG17B Hydrostatic Head Pressure Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
read more1 Sample Preparation Sample and standard friction white cloth should be in such environment of constant temperature and humidity to humidify. When the sample has many kinds of colors, should make all colors rubbed. If the size of a variety of colors is large enough , should be sampled Respectively. Cutting sample, do dry friction and wet friction respectively, should be ensured to rub to all colors. If the positive and negative of specimen is made up of different material , colors. So the both positive and negative need to do friction colo fastness test. Doing dry and wet fastness of friction should not be repeated in the same part in the specimen. 2 Dry Friction Flatly put sample on the friction apparatus placing sandpaper, make the length of the specimen is in line with the direction of the moning track of the equipment, and fix sample on the pressuring plate, the folder should be flat. Standard friction small white cloth fix on the friction head, clamp it tightly with spring clamp, lightly place friction head on the specimen. Ensure the specimen without sliding or wrinking when rubs Place friction head on the specimen, connect to he power, open the POWER button, set the times of testing. Press START button to begin the test, when the tests reaches the setting value, the instrument automatically stops. Remove the standard white cotton cloth , going to rate contrasting to color cards. 3 Wet Friction Completely soak standard friction small white cloth in distilled water. After removing, clamp in the filter paper to extrude in order to have a certain degree of water content. The remaining steps is same as the dry friction test. AVENO Machine Recommend: AC04 AATCC Electronic Crockmeter Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
read moreScorch & Sublimation Tester used to test the ability to resist changes or shifts in color of textile under heating condition. Simulate the dyeing sublimation grade of fabric when ironing and under high temperature and humidity in daily life. AVENO new design Scorch & Sublimation Tester (Model: AC09) have 1, 2 and 3 test position for customer choose, meet ISO 105. BS 1006, AATCC 92, 114, 117, 133 DIN 54022/54060, GB/T 5718, GB/T 6152. With Beautiful look and safety and convenient design concept. AVENO Machine Recommend: AC09 Scorch & Sublimation Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
read morePneumatic Bursting Strength Tester is used to determine the expansion force and divergence rate of fabric, woven, knitted fabrics, non-woven, paper and board.
read moreElectronic Laboratory Padder made of stainless steel, easy to move, especially suitable for small laboratory tests. It is mainly used for the liquid content test of small cloth samples in the process of textile printing and dyeing and after finishing, and maintain a certain uniform rolling residual rate, so that the water content is stable, and all kinds of textiles can also be soaked in water and put on the instrument to squeeze water to cooperate with the test. It is a very convenient, simple and effective test tool for the laboratory.
read moreLiquid Leak Test Needle is used to test leakage of liquid stuffed toys.
read moreThe yarn hairiness tester is used to measure and analyze the hairiness index of yarn, and automatically test and statistically analyze the length, quantity, and distribution of hairiness. Can test different kinds of yarn including short fiber yarns made from cotton, wool, linen, silk, synthetic fibers, and their blends.
read moreASTM D3985 Oxygen Gas Transmission Rate Tester suitable for measuring the oxygen permeability performance of high barrier materials such as plastic film, aluminum foil plastic film, waterproof material, metal foil, etc.
read more