+8615280858852
1. The sample is parked in the laboratory environment for more than 8 hours. 2. Cut a piece of specimen on the flat part of the sample. If it is an insole, it should be cut to the transfer site. Samples should be representative. 3. Remove the load and load shaft from the Martindale Abrasion and Pilling Tester. 4. Remove the top plate and test fixture. 5. Installation of sample: loosen the fixing r...
Principle: Sewing the sample of the product together with one or two pieces of the specified lining fabric, and putting it into a mixture of soap or soap and anhydrous sodium carbonate, and then stirring it by machine washing at a specified time and temperature. Rinse, dry, use a gray sample card or instrument to assess the discoloration of the sample and the staining of the lining fabric. Product...
How to use Sharp Point Tester Sharp point tester is used to check if the toy’s accessible position have sharp point which endangers safety. Sharp Point Tester use-method as below: 1.Calibration program 1.1 Rotary loosening locking ring. 1.2 Turn on the test cap until the red indicator lights turn on. 1.3 Turn the test cap slowly until the indicator light just goes out. 1.4 Forward / back rotation ...
Under standard light source, compared with standard sample photo and the sample after test, then get the pilling degree, it is called sample photo method. Sample photo method adopt 1-5 grades, 1 grade is the most serious pilling degree, 5 grade means the pilling resistance of sample is the best. Machine Recommend: AG06 Pilling Assessment Box