+8615280858852
+8615280858852
Please add the lube to the belt pulley axletree and rotating member to make it working well. Please clean the Fabric Pilling Tester face everyday after your test, and you should spray the rust preventing oil regularly. Please check the tightness of the Random Pilling Tester’s belt regularly, and adjust or change the new belt of same standard depending on the circumstance. AVENO Machine R...
1.AATCC Crockmeter Purpose and Scope This test method is designed to de-termine the amount of color transferred from the surface of colored textile materials to other surfaces by rubbing. Suitable for textile products such as yarn, yarn dyeing, printing and dyeing. Not recommended for carpets and printed textiles that are too small. 2.Principle Under certain conditions, the test sample is rubbed a...
1.Before test, clean the ICI Pilling Box with a vacuum cleaner or brush, make sure do not leave any fibers. 2.Placed equipped sample in the ICI Pilling Box. 3.Close the lid of the ICI Pilling tester for Fabric pilling box and fix it. 4.Set the number of revolutions of the ICI Pilling and Snagging Tester. 5.After test, take our the sample and remove the suture. AVENO Machine Recommend: ...
ICI Pilling and Snagging Tester is used to determine the surface fuzzes and pilling properties of both woven and knitted materials. It complies in full with the requirements of EN ISO 12945-1 and BS 5811, etc.. Below is the attention items: Maintenance tips: Regularly check the control panel keys and the screws on each part normal. Regularly clean the cork liner with suitable cleaning solvent, suc...
1. The sample is parked in the laboratory environment for more than 8 hours. 2. Cut a piece of specimen on the flat part of the sample. If it is an insole, it should be cut to the transfer site. Samples should be representative. 3. Remove the load and load shaft from the Martindale Abrasion and Pilling Tester. 4. Remove the top plate and test fixture. 5. Installation of sample: loosen the fixing r...
Principle: Sewing the sample of the product together with one or two pieces of the specified lining fabric, and putting it into a mixture of soap or soap and anhydrous sodium carbonate, and then stirring it by machine washing at a specified time and temperature. Rinse, dry, use a gray sample card or instrument to assess the discoloration of the sample and the staining of the lining fabric. Product...
How to use Sharp Point Tester Sharp point tester is used to check if the toy’s accessible position have sharp point which endangers safety. Sharp Point Tester use-method as below: 1.Calibration program 1.1 Rotary loosening locking ring. 1.2 Turn on the test cap until the red indicator lights turn on. 1.3 Turn the test cap slowly until the indicator light just goes out. 1.4 Forward / back rotation ...
Under standard light source, compared with standard sample photo and the sample after test, then get the pilling degree, it is called sample photo method. Sample photo method adopt 1-5 grades, 1 grade is the most serious pilling degree, 5 grade means the pilling resistance of sample is the best. Machine Recommend: AG06 Pilling Assessment Box
online service
+8615280858852
sales@avenotester.com
+8615280858852
