+8615280858852
1. The sample is parked in the laboratory environment for more than 8 hours. 2. Cut a piece of specimen on the flat part of the sample. If it is an insole, it should be cut to the transfer site. Samples should be representative. 3. Remove the load and load shaft from the Martindale Abrasion and Pilling Tester. 4. Remove the top plate and test fixture. 5. Installation of sample: loosen the fixing r...
1.The Martindale Abrasion Tester need to clean on a regular basis to ensure cleanliness. 2.Regularly check if the Abrasion and Pilling Tester abnormal. 3.Please use the Martindale Test Machine according to the instructions, so as not to damage the instrument and affect the life of the instrument. 4.Please put the accessories back to their original position after use to avoid loss. 5.Turn off the p...
Open Martindale Abrasion and Pilling Tester’s power switch, the screen will show following: Press the test to enter the work interface, the screen will show following: (1) When the Martindale Abrasion Tester is not in working state, Click “Times” button to set test times. The setting range is 0~999999 times. (2) When the Martindale Abrasion Tester is not in working state, Click “Speed” button to s...
Martindale Abrasion and Pilling Tester is developed primarily to assess abrasion resistance of woven worsted wool fabrics. It can also be used to determine the wool fabric pilling performance under slight pressure. Not available in thickness of more than 3mm of wool fabric. It can also be used to determine the wool fabric pilling performance under slight pressure. The heavy hammer and key componen...
1. The sample is parked in the laboratory environment for more than 8 hours 2. Cut a sample at the flat part of the sample, if it is an insole, it should be cut to the transfer part 3. Remove the load and load shaft from the testing machine 4. Remove the top plate and test fixture 5. Device for the sample: Loosen the fixing ring on the test fixture, remove the sample tablet, place the sample in th...
1. Application Martindale Abrasion and Pilling Tester was developed primarily to assess abrasion resistance of woven worsted wool fabrics. It can also be used to determine the wool fabric pilling performance under slight pressure. Not available in thickness of more than 3mm of wool fabric. It can also be used to determine the wool fabric pilling performance under slight pressure. Its display uses ...