+8615280858852
1. Automatic Wascator Shrinkage Tester leakage: Check that the inlet, drain joint or drain valve is properly installed. 2. Abnormal internal gallbladder rotation sound or motionless or show abnormal motor (ALM.M) Check the frequency converter for failure or alarm. Check to see if there is an abnormal jam in the rotating device. 3. The interface shows the inflow anomaly (ALM.I) Check if the water l...
1) Before the ICI Mace Snag Tester experiment, first place a sufficiently large fabric sample to be tested in a temperature of 20 ± 2 ° C and a relative humidity of 60% ± 2% for 24 hours. 2) From the fabric to be tested, parallel warp at a distance of 1/10 of the width, and cut out two pieces of samples with a size of 200mm × 330mm in the weft direction without damage or defects. 3) At the middle ...
45 Degree Automatic Flammability Tester is used to determine flammability of textile under controlled conditions. Troubleshooting Of Automatic Flammability Tester Failure situation Possible reason Elimination method Turn on the power switch, the power switch indicator is off. The power is not input. The fuse is blown out. Ask an electrician to check and repair the power supply line. Repl...
AC02 Light Fastness Tester (water-cool) is a testing machine developed by our company according to the requirements of national standards and AATCC standards. The machine adopts the latest sensor technology and microcomputer control technology, and has the advantages of high measurement and control accuracy, high intelligence, stable and reliable performance; simple and clear interface, easy opera...
1. The power supply should use a separate socket, the grounding line in the socket must be reliably grounding. 2. Rotary Tumble Dryer can not be installed in the open air and too wet environment, otherwise the electrical parts affected by humidity will easily cause fire damage or other failures. If the Fabric Tumble Tester is accidentally drenched with water or leaked into the water, it must be ve...
1 The Martindale Test Machine For Fabric case must be grounded and its grounding resistance should be less than or equal to 1Ω. 2 Do not bump the parts during handling, installation, adjustment and use to avoid mechanical damage and affect the test results. 3 The touch buttons in the Martindale Abrasion Test Equipment control panel can only be pressed with your fingers. Do not use other hard objec...