Snap Button Pull Tester AG03
Snap Button Pull Tester used to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys.
+8615280858852
Bursting Strength Tester is used to determine the expansion force and divergence rate of fabric, woven, knitted fabrics, non-woven, paper and board.
model :
AG10Brand:
AVENOorigin:
ChinaLead Time:
7-10daysport:
Xiamen portPayment:
T/T, L/Ccertificate:
CE, ISO9001, ISO17025standard:
ISO, EN, ASTM, AATCC, M&S, JIS, and etc.
AG10- Bursting Strength Tester
Application Of Bursting Strength Tester
Bursting Strength Tester is used to determine the expansion force and divergence rate of fabric, woven, knitted fabrics, non-woven, paper and board.
Standards Of Bursting Strength Tester
ASTM D3786-06, ISO 2758/13938-1, BS 3424/3137, BS 4768, AS2001.2.4, GB/T 7742, IWSTM 29, EDA NA 80.4-02/80.3-99, NEXT 22 2206, FZ/T60019, JIS L 1018.6.17, BS-2922, FZ/T 60019, FZ/T 01030, JIS L 1018.6.17.
Key Specification Of Bursting Strength Tester
|
Model |
AG10-1 |
AG10-2 |
|
Test range |
2.00Mpa |
10.00Mpa |
|
Min division value |
0.001Mpa |
0.003Mpa |
|
Bursting method |
Hydraulic bursting method |
|
|
Clamp |
Pneumatic clamp |
|
|
Test area |
7.3cm2(φ30.5mm), 10cm2(φ35.7mm), 50cm2(φ79.8mm), 100cm2(φ112.8mm), |
|
|
Max expansion height |
75±0.02mm |
|
|
Pressure speed |
20-600ml/min |
|
|
Test method |
Constant rate bursting Constant expansion Constant pressure Constant time bursting |
|
|
Pressure units |
Kpa, kg/cm2, bar, lb/in2 |
|
|
Power supply |
AC220V, 50/60HZ |
|
|
Dimension |
550*450*700mm |
|
|
Weight |
125Kg |
|
Accessories Of Bursting Strength Tester
|
Standard Accessories |
7.3cm2 test set (φ30.5mm) |
1set |
|
50cm2 test set (φ79.8mm) |
1set |
|
|
Wrench |
1pc |
|
|
Calibration plate |
1pc |
|
|
Rubber diaphragm |
1pc |
|
|
English operate software |
1set |
|
|
Cable to connect with computer |
1pc |
ICI mace snag tester applicable to knitted and woven fabrics and other fabrics that are prone to snags, applicable to woven and knitted fabrics made of textured yarns, non-textured yarns and spun yarns.
read moreFlocking Abrasion Tester is applicable to wear resistance test of various automotive fluff and coated guide channel sealing strips and sponge coated door frame sealing strips, door sealing strips, trunk sealing strips and other products.
read moreRaw Material Moisture Meter widely used in industries such as leather, leather products, fabrics, clothing, yarns, axial yarns, tubular yarns, textiles, etc. that require rapid determination of moisture content (regain).
read moreSATRA TM142 Falling Mass shock Absorption Tester is used to test the material system used in the midsole of sports shoes used in regular running sports, determine their shock absorption characteristics and rapid compression force displacement relationship.
read moreLow Temperature Whole Shoes Flexing Tester is used to test the flexing resistance of hole shoes and sole, than check the crack position and degree, as a reference to improve the quality of shoes and sole.
read more
online service
+8615280858852
sales@avenotester.com
+8615280858852