Safety Shoes Impact Tester AF03
Safety Shoes Impact Tester is used to test the impact resistance of safety shoe.
+8615280858852
When test, a test piece taken from the ankle protective area of the upper is subjected to an impact test and the transmitted force measured.
model :
AF03BBrand:
AVENOorigin:
ChinaLead Time:
3-7daysport:
Xiamen portPayment:
T/T, L/Ccertificate:
CE ISO9001 ISO17025standard:
EN ISO 20344, GB/T 20991, AS/NZS 2210.2AF03B- Ankle Protection Materials Shock Absorption Capacity Tester
Application Of Ankle Protection Materials Shock Absorption Capacity Tester
When test, a test piece taken from the ankle protective area of the upper is subjected to an impact test and the transmitted force measured.
Standards Of Ankle Protection Materials Shock Absorption Capacity Tester
EN ISO 20344, GB/T 20991, AS/NZS 2210.2
Key Specification Of Ankle Protection Materials Shock Absorption Capacity Tester
|
Model |
AF03B Ankle Protection Materials Shock Absorption Capacity Tester |
|
Control mode |
LCD control |
|
Impact energy |
10J |
|
Impact surface |
80*40mm (rectangle) |
|
Impact hammer mass |
(5000±10g) |
|
Anvil dimension |
Height 175±25mm, with cylinder radius 25mm |
|
Power supply |
AC220V, 50/60HZ |
|
Dimensions |
80x90x210 cm |
|
Weight |
200kg |
Accessories Of Ankle Protection Materials Shock Absorption Capacity Tester
|
Standard Accessories |
Ankle special clamper |
1set |
|
Standard rubber mud mold |
1set |
|
|
Plasticene |
1set |
|
|
Hexagon spanner |
1set |
|
|
Power line |
1pc |
Related Products
Glove Impact Testing Equipment used to test the impact resistance of gloves, motorcycle protective clothing, knee pads, etc. During the experiment, lift the impact hammer to the height of the required impact energy, release the impact hammer, and drop it along a vertical guide path onto the sample placed on the test anvil. The center axis of the falling hammer coincides with the center axis of the anvil. Record the peak force of the impact test and check whether the sample is torn or perforated.
read moreSeat Belt Friction Tester is used to simulate the pilling changes of clothing caused by seat belt friction.
read moreAccording to the bending force of the sample, according to the standard spacing and load weight requirements, perform reciprocating bending resistance under the specified testing speed conditions, observe whether there are cracks, coating peeling, adhesive delamination and other abnormal quality conditions on the surface, suitable for belt, shoulder strap, luggage soft lift and other belt products
read moreDouble row LCD display, front and rear two display screen. Rechargeable battery. Weighing, peeling, counting, unit conversion. RS232 data interface, linking computers and printers.
read moreAlcohol Rubber Abrasion Tester used for glass cover plates, films, plastics, automotive parts, rubber, leather and textiles, electroplating, freely detachable components, paints, printed patterns and other products.
read more
online service
+8615280858852
sales@avenotester.com
+8615280858852