+8615280858852
The design of an instrument not only needs the accuracy of the test results, but also needs to pay attention to the operator's convenience of operation and the result review. Aveno combined the above points to design a Martindale Abrasion Tester that is easy to operate and review the results, and he uses precision components to precisely control the abrasion and pilling movement. The design princi...
The Martindale Abrasion and Pilling Tester is used to determine the pilling of fabrics under slight pressure: 1. Under the specified load, the circular sample is rubbed with the abrasive (that is, the standard fabric) with the plane motion of the trajectory forming the Lissajous figure. 2. The specimen holder containing the specimen or abrasive is free to rotate about the axis of the Martindale Ab...
Manual Twist Tester is used to determine the number of twists of various yarns such as cotton, wool, hemp, and silk within a certain length to assess the quality of the product so as to correct the problems in the production process. Structure of Twist Tester for Yarn Picture 1 1. The structure is shown in the Picture 1. It is composed by the counting plate transmission gear, gripper, tension hamm...
Light Fastness Tester (water-cool) is a testing machine developed by our company according to the requirements of national standards and AATCC standards. The machine adopts the latest sensor technology and microcomputer control technology, and has the advantages of high measurement and control accuracy, high intelligence, stable and reliable performance; simple and clear interface, easy operation,...
Spray Rating Tester is used to determine the water resistance of any fabrics, which may or may not have been given a water-repellent finish, to surface wetting by water. It is not intended to predict waterproofness, since it does not measure the penetration of water through fabric. 1.SAMPLE PREPARETION Cut off 3 180mm×180mm size smooth sample from the under-test fabric. Sample pre-conditioning: ta...
Martindale Abrasion Tester is suitable for abrasion resistance test and apparent pilling performance test of woven fabrics, knitted fabrics, non-woven fabrics, decorative materials and coated fabrics. Martindale Abrasion Tester Test Principle: The fabric to be tested is installed in the upper sample holder and rubbed against the abrasive installed on the grinding table, and the friction trajectory...
ICI mace snag tester applies to rapid determine the snag resistance of fabric, (pull yarn loops from fabric). And suitable for woven and knitted fabrics made by textured yarn, non-textured yarn, and spun yarn, etc. 1. Items to be confirmed before operation: 1) Confirm whether the power supply meets the requirements。 2)Whether the surface of the sample is round。 3)Put the nail hammer around the gui...
Bursting strength is the most advanced method performed on fabrics to measure the strength of a material. It can be defined as the force required to break a woven/knitted fabric under standard conditions by a force applied perpendicular to the plane of the sample. Fabrics are often stressed in all directions during use, so it is necessary to apply actual stress to the material to determine the fab...
1. Equipment (1) TTF Tensile Tester (2) 200LBS or above pull-pound (3) Stopwatch (4) Steel ruler or caliper (5) Temperature/Hygrometer 2 Internal calibration and maintenance of equipment: All equipment is inspected and maintained every three months, and the inspection and maintenance results are recorded in the "Instrument Maintenance Record". 3 Test Conditions (1) Room temperature: 23±2℃, humidit...
Notice! There are new changes in the fuzzing and pilling rating regulations! Come see your fabric felt? With GB / T 4802.4-2020, ISO 12945-1: 2020, ISO 12945-2: 2020, ISO 12945-3: 2020, ISO 12945-3: 2020, ISO 12945-4: 2020, etc., the results of the above standard gaze rating also have Change. 1. The old standard requires the issuance of pilling levels, such as pilling Level 3; 2. The new version o...