+8615280858852
+8615280858852
ICI mace snag tester applies to rapid determine the snag resistance of fabric, (pull yarn loops from fabric). And suitable for woven and knitted fabrics made by textured yarn, non-textured yarn, and spun yarn, etc. 1. Items to be confirmed before operation: 1) Confirm whether the power supply meets the requirements。 2）Whether the surface of the sample is round。 3）Put the nail hammer around the gui...
Bursting strength is the most advanced method performed on fabrics to measure the strength of a material. It can be defined as the force required to break a woven/knitted fabric under standard conditions by a force applied perpendicular to the plane of the sample. Fabrics are often stressed in all directions during use, so it is necessary to apply actual stress to the material to determine the fab...
1. Equipment (1) TTF Tensile Tester (2) 200LBS or above pull-pound (3) Stopwatch (4) Steel ruler or caliper (5) Temperature/Hygrometer 2 Internal calibration and maintenance of equipment: All equipment is inspected and maintained every three months, and the inspection and maintenance results are recorded in the "Instrument Maintenance Record". 3 Test Conditions (1) Room temperature: 23±2℃, humidit...
Notice! There are new changes in the fuzzing and pilling rating regulations! Come see your fabric felt? With GB / T 4802.4-2020, ISO 12945-1: 2020, ISO 12945-2: 2020, ISO 12945-3: 2020, ISO 12945-3: 2020, ISO 12945-4: 2020, etc., the results of the above standard gaze rating also have Change. 1. The old standard requires the issuance of pilling levels, such as pilling Level 3; 2. The new version o...
1. Calibration items: speed, temperature 2. Calibration equipment: electronic stopwatch, thermometer 3. Calibration period: one year 4. Calibration steps: 1) Speed correction method: a) Turn on the power of the Durawash Tester, set the temperature to be lower than the displayed temperature, and set the test time. b) Press the start button to run the Printed Durability Tester and let the stopwatch ...
Manual Laboratory Padder is used to test the liquid content of fabric when textile printing and dyeing, finishing process, and holding uniform rolling surplus rate to make water content stable. Also can used to pull out moisture of the soaked textile, it is a very convenient, simple and effective laboratory test tool. Do you want to know more about the Laboratory Dyeing Padder? Control mode: Manua...
1. Before using the 5KN 10KN 20KN strength tester, check whether there is a reliable grounding device. 2. The voltage in the laboratory must be stable. It is best to install a voltage stabilizer in the laboratory. Do not use the Universal Testing Machine (Dual Column) when the voltage is unstable, so as to avoid short-circuiting and burning circuit boards due to unstable voltage. 3. When replacing...
Manual Fabric Stiffness Tester is suitable for rigid flexibility test of cotton, wool, silk, hemp, chemical fiber and other woven fabrics, knitted fabrics and general nonwovens, coated fabrics, and other flexible materials, such as paper, leather, film and other flexible materials. Do you want to know more about the ASTM D1388 Stiffness Tester? Test angle 41.5° Press block length 200mm Press block...
Prepare the sample of Crumple Flex Tester 1. As far as possible, place the sample in an environment with a temperature of (23±2)℃ for at least 3 hours. 2. Take out the controlled test sample, use a knife mold (220*190mm) to plant at least 4 test pieces from the effective width fabric, and pay attention to taking the average number of test samples in the radial and transverse directions when sampli...
1. Prepare the test piece of Manual Fabric Stiffness Tester: 1) Use scissors to cut out the size of 25mm×200mm from the sample to be tested, with the long side of the sample facing the warp direction, the weft direction, and three samples each without damage and defects. If possible, samples in all directions should not contain the same number of warp (weft) yarns. 2) Specimen processing: All spec...
online service
+8615280858852
sales@avenotester.com
+8615280858852
