Snap Button Pull Tester AG03
Snap Button Pull Tester used to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys.
+8615280858852
Sweating Guarded Hot Plate Tester is used to test the thermal and evaporative of clothing material.
model :
AG48Brand:
AVENOorigin:
ChinaLead Time:
10-20daysport:
Xiamen portPayment:
T/T, L/Ccertificate:
CE ISO9001 ISO17025standard:
GB/T11048, ISO11092, ASTMF1868-09, BS 8515, ASTM D 1518-2014, JIS L1096-2010, ASTM F 1868-02AG48-Sweating Guarded Hot Plate Tester
Application Of Sweating Guarded Hot Plate Tester
Sweating Guarded Hot Plate Tester is used to test the thermal and evaporative of clothing material.
Test Principle Of Sweating Guarded Hot Plate Tester
Under standard test environment, heat the fixed aluminum or copper plate and keep a fixed temperature, test the heating power, then test the power of the same situation after covering the sample cloth, to get the hermal and evaporative of clothing material.
Feather Of Sweating Guarded Hot Plate Tester
Standards Of Sweating Guarded Hot Plate Tester
GB/T11048, ISO11092, ASTMF1868-09, BS 8515, ASTM
D 1518-2014, JIS L1096-2010, ASTM F 1868-02
Key Specification Of Sweating Guarded Hot Plate Tester
|
Model |
AG48 Sweating Guarded Hot Plate Tester |
|
Thermal resistance (RCT) range |
0.002~2.0 m2.K/W |
|
Wet resistance (RET) range |
0~1000 m2.Pa/W |
|
Test board temperature range |
30℃~40℃, adjust |
|
Temperature precision |
±0.03℃ |
|
Wind speed |
0-1.2m/s, continuous adjustable |
|
Wind speed precision |
±1% |
|
Test sample thickness |
0-50mm |
|
Test plate area |
254mm×254mm |
|
Sample area |
512mm×512mm |
|
Thermal ring width |
127mm |
|
Power supply |
AC220V, 50/60HZ |
|
Dimension |
73×61×35cm |
|
Weight |
60Kg |
Accessories Of Sweating Guarded Hot Plate Tester
|
Standard Accessories |
Lab test analysis software |
1set |
|
Test film |
100pcs |
|
|
Power line |
1pc |
|
|
Option Accessories |
AE01 Temperature & Humidity Test Chamber |
|
Glove Impact Testing Equipment used to test the impact resistance of gloves, motorcycle protective clothing, knee pads, etc. During the experiment, lift the impact hammer to the height of the required impact energy, release the impact hammer, and drop it along a vertical guide path onto the sample placed on the test anvil. The center axis of the falling hammer coincides with the center axis of the anvil. Record the peak force of the impact test and check whether the sample is torn or perforated.
read moreSeat Belt Friction Tester is used to simulate the pilling changes of clothing caused by seat belt friction.
read moreAccording to the bending force of the sample, according to the standard spacing and load weight requirements, perform reciprocating bending resistance under the specified testing speed conditions, observe whether there are cracks, coating peeling, adhesive delamination and other abnormal quality conditions on the surface, suitable for belt, shoulder strap, luggage soft lift and other belt products
read moreDouble row LCD display, front and rear two display screen. Rechargeable battery. Weighing, peeling, counting, unit conversion. RS232 data interface, linking computers and printers.
read moreAlcohol Rubber Abrasion Tester used for glass cover plates, films, plastics, automotive parts, rubber, leather and textiles, electroplating, freely detachable components, paints, printed patterns and other products.
read more
online service
+8615280858852
sales@avenotester.com
+8615280858852